jdanielsg
04-01-2006, 06:52 PM
Ok I am going to start a install thread for the JDM Rainguards. I would need some help/clarification about what goes where, The instructions arent particularly helpful. Flipspeed/Joe can you help out?
To start off there are 4 plastic pieces naturally.
As for clips and what not, There are 3 different type of clips/holders and 2 kinds of platic bolts/washer type things (not pictured for now)
Here are the pics of the clips.
http://img84.imageshack.us/img84/8223/clipsmedium5yf.jpg
Lets talk about the front windows. There are 3 holes on the front window pieces which means they have ot be secured in 3 places. And 2 for the back.
So there are 10 clips. So where do each of those go and do they go the plastic or do they go on the rubber seal? So lets name them the ones on the top row r A clips and the 2nd row on the left B and the 2 larger ones on the right C.
I am trying to make sense of the instructions and this is what I gather:
The back pieces only use B clips. The front piece uses 1 C slip on each side the edge of the guard thats nearest to the back door. The middle of the front guard uses B clip and the edge nearest the side mirrors uses A ?
So lets start with A, I am supposed to bolt it on and the edge thats sticking out is supposed to slide under the plactic trim thats holding the side mirrors?
For Clip B :http://img213.imageshack.us/img213/3851/clipbmedium5be.jpgIs that the correct orientation of the clip? Facing up that way?
So if the idea of these Clips B and C to be affixed onto the plastic with the plastic bolts/washer type things and just sort of hung onto the door? And of course the 3M tape removed and stuck.
I just realised something so these r supposed to be stuck in the rubber or wherever that the window glass closes up to right? So did you guys clip first the somehow edged and pull off the tape while cliped n press down or ?
To start off there are 4 plastic pieces naturally.
As for clips and what not, There are 3 different type of clips/holders and 2 kinds of platic bolts/washer type things (not pictured for now)
Here are the pics of the clips.
http://img84.imageshack.us/img84/8223/clipsmedium5yf.jpg
Lets talk about the front windows. There are 3 holes on the front window pieces which means they have ot be secured in 3 places. And 2 for the back.
So there are 10 clips. So where do each of those go and do they go the plastic or do they go on the rubber seal? So lets name them the ones on the top row r A clips and the 2nd row on the left B and the 2 larger ones on the right C.
I am trying to make sense of the instructions and this is what I gather:
The back pieces only use B clips. The front piece uses 1 C slip on each side the edge of the guard thats nearest to the back door. The middle of the front guard uses B clip and the edge nearest the side mirrors uses A ?
So lets start with A, I am supposed to bolt it on and the edge thats sticking out is supposed to slide under the plactic trim thats holding the side mirrors?
For Clip B :http://img213.imageshack.us/img213/3851/clipbmedium5be.jpgIs that the correct orientation of the clip? Facing up that way?
So if the idea of these Clips B and C to be affixed onto the plastic with the plastic bolts/washer type things and just sort of hung onto the door? And of course the 3M tape removed and stuck.
I just realised something so these r supposed to be stuck in the rubber or wherever that the window glass closes up to right? So did you guys clip first the somehow edged and pull off the tape while cliped n press down or ?