View Full Version : Sedan Mazdaspeed Exhaust on a Hatch
nabru
05-19-2006, 07:04 PM
I recently purchased a Mazdaspeed exhaust, but due to a part number error I ended up with a sedan exhaust.
To those who like the look of a tip that extends by an inch or so from the bumper here\'s how it looks like on a hatch.
Note: there were no fitment issues.
Here are some pics from different angles, hope the pics work
http://img466.imageshack.us/img466/49/ex13bj.jpg
http://img370.imageshack.us/img370/975/ex20xz.jpg
http://img370.imageshack.us/img370/2967/ex31zf.jpg
http://img370.imageshack.us/img370/2364/ex46cb.jpg
That\'s how it looks underneath the car. I raised the car to install the correct exhaust.
http://img318.imageshack.us/img318/9536/ex58qx.jpg
You can catch a small glimpse of the progress sway bar on this pic.
http://img361.imageshack.us/img361/4064/ex67vs.jpg
Here\'s the final one.
http://img406.imageshack.us/img406/7075/ex79ub.jpg
So far, the Mazdaspeed exhaust has been pretty nice. Not too loud, and quite agressive when you step on it.
chaser
05-19-2006, 10:43 PM
It doesn\'t stick out too much, looks nice :)
BTW, welcome to the forum :hoho
SABIO
05-19-2006, 11:20 PM
Looks fine to me... I like it better. You can read that it is a MazdaSpeed exhuast.
cyberscorpi0
05-20-2006, 08:05 AM
Looks Good.
FLIPDADY
05-20-2006, 10:01 AM
Yeah some people like the tip to stick out a bit.
Sorry about the mix-up with the 2 part numbers.
Btw, your car looks great man.
sp3GT
05-20-2006, 09:33 PM
How much does the Mazdaspeed Exhaust cost around?
nabru
05-21-2006, 03:23 AM
to Flipspeed:
No worries about the mix-up, I called you about the error and exactly one week later I received the new part. So I should thank you for getting the replacement within such a short amount of time. Great service, great guy.
Installing the exhaust was pretty fun, nice and easy too, but that\'s as long as you have jack stands.
this is how it looks now in my hatch
http://img125.imageshack.us/img125/1672/dsc003084ua.jpg
to sp3GT:
You\'re looking at around 600 tax-in plus install. And I believe, if you have it installed at the dealership (visit Flipspeed @ Mazda of Toronto) you are warrantied on the labour, so that\'s an extra peace of mind if you don\'t feel comfortable cutting your stock exhaust.
etothex
06-15-2006, 11:15 PM
That pipe looks pretty sweet. I\'m thinking of getting one for my 3.
Flip, how much would installation be?
Skarbro
06-16-2006, 07:52 AM
It looks better when it\'s not sticking out IMO.
FLIPDADY
06-16-2006, 08:34 AM
Originally posted by etothex
That pipe looks pretty sweet. I\'m thinking of getting one for my 3.
Flip, how much would installation be?
If you want the stock system cut it\'s $132.30 plus taxes.
What model do you drive? I have a used sedan one in stock for cheap.
etothex
06-16-2006, 10:45 AM
I have a 2005 GT hatch. You wouldn\'t happen to have one for the hatcg for cheap? :)
FLIPDADY
06-16-2006, 11:28 AM
Originally posted by etothex
I have a 2005 GT hatch. You wouldn\'t happen to have one for the hatcg for cheap? :)
Nope but if you want to put the sedan one on we can talk a good price.;)
etothex
06-16-2006, 12:57 PM
I think I\'d rather go with the one for the hatch. But thanks.
Originally posted by nabru
http://img361.imageshack.us/img361/4064/ex67vs.jpg
Apologies if I assumed incorrectly but you should be placing the wheel blocks on the "other side" of the wheel, furthest away from the raised end. You want to stop the car from rolling "away" and "off" the jack/jack-stand.
nabru
06-30-2006, 06:42 PM
No worries,
My driveway is quite angled, the car would in fact roll backwards if the blocks were put at the front. But yea, blocks are a must.
Gotta make sure the car is stable, safety first!:)
Zaku_4
07-03-2006, 12:53 AM
wow
i like the sedan one. protruding tips are hawwt.
how much for the used sedan one flipspeed:D
FLIPDADY
07-03-2006, 07:58 AM
Originally posted by Zaku_4
wow
i like the sedan one. protruding tips are hawwt.
how much for the used sedan one flipspeed:D
Already sold it a few weeks ago.
Sorry.
I do have a new sedan one in stock though.
KC-01
07-10-2006, 12:41 PM
Originally posted by FLIPSPEED
Originally posted by Zaku_4
wow
i like the sedan one. protruding tips are hawwt.
how much for the used sedan one flipspeed:D
Already sold it a few weeks ago.
Sorry.
I do have a new sedan one in stock though.
Hi Joe,
Can you give me a quote for the Mazda Speed exhaust for the hatch? Does anyone have a soud clip of it?
Thanks.
bluntman
07-10-2006, 12:46 PM
Originally posted by KC-01
Hi Joe,
Can you give me a quote for the Mazda Speed exhaust for the hatch? Does anyone have a soud clip of it?
Thanks.
Originally posted by FLIPSPEED
-Sport Exhaust (sedan and sport models) $530.10
**All prices listed above include the TM3 discount and do not include taxes.**
Sticky
Taken from this thread...
http://torontomazda3.com/forum/read.php?TID=5250&page=3
Sound clips can also be found in the same thread, but on page 6...
http://torontomazda3.com/forum/read.php?TID=5250&page=6
Broli
07-12-2006, 03:36 AM
i like the look of the hatch exhaust on the hatch better!
the sound of this intake is very nice
every time i hear one of they guys who have it
i think, that really sound good!
FLIPDADY
07-13-2006, 08:52 AM
I currently have 1 of each system in stock.
KC-01
07-13-2006, 08:10 PM
Originally posted by FLIPSPEED
I currently have 1 of each system in stock.
So $530 + tax for the sport exhaust? I\'m very interested. Joe, would you know how much the service deptat MoT charges for the installation? Would I be able to get a good price for that?
Thanks.
Kent
FLIPDADY
07-14-2006, 07:53 AM
Originally posted by KC-01
Originally posted by FLIPSPEED
I currently have 1 of each system in stock.
So $530 + tax for the sport exhaust? I\'m very interested. Joe, would you know how much the service deptat MoT charges for the installation? Would I be able to get a good price for that?
Thanks.
Kent
Yup $530 + taxes for the system and $132 + taxes for labour.
FLIPDADY
03-06-2007, 08:34 AM
Here you go Chuckie!
Chuckie
03-06-2007, 09:13 AM
thanks for the bump!.. i was looking for this..
I doesn't look as bad as I imagined it would be.
but i still like the tucked look..
refer to avatar.
p.s: xg won't sell it to me for my lowballer price.. LOL.
if only i didn't spend so much now or get paid a little more...
gots no money right now.. almost 0.
next paycheck if someone is selling a hatch exhaust for around the same price. i'd jump on it.
Ha, looks like my protrusion :P
FLIPDADY
03-07-2007, 09:10 AM
Ha, looks like my protrusion :P
No pics please!:chuckle
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.