Angel Eyes

[BLKOUT]

I want to get the angel eyes, but I am a little worried about future problems. So I pose this pole to the people who have this mod.

Have you had any problems sisnce the mod?

Who did your install?

Thanks in advance guys!

[bluntman]

No problems since my install...last summer I believe, by Lockdown.

[CoolColombian]

No problems at all, I did the installation myself about a year ago.

[craigrodrigues88]

oh man angel eyes, probably one of the sexiest mods!...I want, but I am reluctant for the same reasons as you BLKOUT

[royroy]

problem.... condensation

[bubba1983]

i was the first person on this board to have them installed, after a few hiccups, everythign is gooood now!!

[MazdaTree]

problem.... condensation

+1

if you get them done at a good place... they'll take care of ya!

[Gizzmo_jr]

I DIY and haven't had any problems. Advice...avoid heatgun method. Oven only.

[Jeff-TheBiz]

avoid heatgun method. Oven only.

I did the exact opposite.

Just make sure you seal if back up good..

I used 'Plumbers Goop'

[royroy]

+1

if you get them done at a good place... they'll take care of ya!
ya.. i m going back to lockdown to get them fix it bak for me=P

[WhiteSpeed3]

will the kits that are out fit the headlights of a speed i think theres a very slight difference

[monty0501]

please excuse....

but where is lockdown???

[BLKOUT]

lockdown is in Scarborough @ McCowan & Nugget (first street north of Sheppard)

[monty0501]

thanks for the info...btw do they have the angel eyes in stock? or would I have to purchase firts?

[cyberscorpi0]

thanks for the info...btw do they have the angel eyes in stock? or would I have to purchase firts?

Contact Devin at The Xenon Store (to order the Angel/Demon Eyes) and have Lockdown install it for yah.

[bluntman]

Contact Devin at The Xenon Store (to order the Angel/Demon Eyes) and have Lockdown install it for yah.

+1

That's what I did.

http://ca.geocities.com/alegardo@rogers.com/grille.jpg

[BLKOUT]

anyone know what lockdown charges to do the install?

[bluntman]

Last year is was around $100 if I am not mistaken.

[bubba1983]

i thought 200? cause they charge you a standard SKU for front bumper removal, around 60-$70

[Gizzmo_jr]

The whole process is pretty painless, besides being scared your headlights are going to melt, which they don't. I can post up exactly what to do if you want. Save yourself the coin.

[Caz]

I am really considering this myself, it looks so good.

[royroy]

lockdown charged me $200 last october..

[bubba1983]

as i say, they charge flat rate for bumper removal/install of $60ish dollars, i rememebr this clearly cause i had worked with them extensively when they first started putting in angeleyes

[rsquared]

The whole process is pretty painless, besides being scared your headlights are going to melt, which they don't. I can post up exactly what to do if you want. Save yourself the coin.

Please do! I bought my angel eyes so long ago, but have yet to install them. I've read through some how-to guides on M3F, but none are really thorough from beginning to end. For me, the wiring part is the scariest, as I've never done any wiring work in my car.

[MazdaTree]

yea i think its 200+ call for an estimate

[Broli]

they are soooo sick, and i have been thinking about them forever, but of everyone i know who has had them there has been some problems . .

sure the place that installs them will probably fix it, but i can take the time to go 6 times to some place to have something installed!

but . . . they are so damned hot!!

[Gizzmo_jr]

http://www.torontomazda3.ca/forum/showthread.php?t=18152

[rsquared]

Much appreciated Gizzmo! I'm sure I'll have more questions once I install them, do you mind if I get in touch? I'll make sure to take pics and create a how-to for the forum.

[Gizzmo_jr]

I've got some tutorials with pictures bookmarked at home. I'll take 30min sometime and put in those photos with my guide. Cause all of what I did I knew ahead of time (aside from reading 4 guides if I recall).

[Gizzmo_jr]

Added pictures, still hunting down some more.

[TurboEight]

man..i paid like friggin 370for the install and then the angel eyes cost me another 250=(

back then i did then RIGHT after bubba!

[Magitronic]

just so your all aware ... unless maybe lockdown doesnt like me, the increased price of the install is 350 :o , I dont think they really wanna do it anymore :P

[MattC]

I heard that lockdown wasn't even going to do these installs anymore.

There is alot of liability involved in this, and small things can go wrong randomly, so 350 seems like a good price... it also takes a while to complete the install, so you are looking at around 4-6 hours or more.

[bubba1983]

its soooooooooooooo eaasy fellas!

[Gizzmo_jr]

its soooooooooooooo eaasy fellas!

+1, just need a good guide :gone

[JonsMazda]

it gets easier once u do them.

[btown-mazda]

Did the install myself this past July and had Lockdown do the wiring.
Once the passenger side had condensation but never again.