PDA

View Full Version : Blown Fuse ?



VetalM3
05-24-2007, 09:59 PM
Hello everyone, I was recently trying to put the door sills so i was doing the wiring when i accidently touched the 2 wires (black/red and orange/green ). Now the radio and power locks dont work. I hope its just a fuse. If so where can i find it to replace, if not what can be the problem ? Thank you.

majic
05-24-2007, 10:59 PM
if it is a fuse, then there are spare ones in the fuse box, if not, see which one is blown and just go to crappy tire and buy one (an ATO fuse).. if you're close to downtown then go to active surplus as they will be about 10c-50c each vs a few bux maybe..

if it's not a fuse (and pray it is) then a part of the PJB could have fried (and a PJB ain't cheap.. $2K IIRC).. but that would usually render most of the other ccts useless.. so it's most likely the fuse..

VetalM3
05-24-2007, 11:53 PM
Thanks a lot. I figured it out - it was that blue fuse ( ROOM fuse in Fuse box ).

WeatherB
05-26-2007, 07:27 PM
Although you have solved your problem, in the benefit of other members, it might be good to point out that the car uses mini fuses...

McGuyver_3
06-03-2007, 12:13 AM
Thanks a lot. I figured it out - it was that blue fuse ( ROOM fuse in Fuse box ).

what the heck is the room fuse????
as far as i am aare of the 3 comes with a 7.5 radiofuse and a 25amp p/door lock fuse or am i missing something here?