PDA

View Full Version : Quy's Powder Coating



Garu
07-18-2007, 09:16 PM
I got my hands on RX-8 rims last week. I was shopping around to get the rims powder coated. I called this place called 'K&M metal coating' and they told me that they don't take 'small business' and gave me a number.
I called the number this guy named Quy told me to come in and he'll do the whole set for $150.

His office hours are 7:30 am to 3:30pm, but he said I can call him whenever I finish my work and he can drop by the shop for me. Very nice guy, he will try everything to take care of you. I asked him about the clear coating he said he would charge $250, if I'm doing the second coat.

Anyways after 2 days, he told me they were ready, I picked them up, here is the result.

http://i176.photobucket.com/albums/w173/garu79/DSC01701.jpg
http://i176.photobucket.com/albums/w173/garu79/DSC01700.jpg
http://i176.photobucket.com/albums/w173/garu79/DSC01702.jpg
I did the 2nd coat, those shiny things are from the clear coat.

Amazing result at amazing price. I highly recommend this guy if you want powder coating job done to your rims.

He's located at Brampton near Main st & Bovaird. His cell phone number is 416-219-9463. Tell him Brandon sent you and you're part of the club, he'll give you a deal.

yellowmp5
07-18-2007, 09:33 PM
that looks amazing! was it previously sand blasted?
or j/ powdercoat on top of existin' wheel paint?
nevertheless,
lookz much better than mine...

how are u gonna colour match your center caps?

Garu
07-18-2007, 09:34 PM
I have no clue... probably go to home depot and find the closest match...
How did you do yours?

yellowmp5
07-18-2007, 09:53 PM
i had my wheels sand blasted, and got it powdercoated....
many have adviced that the coating holds better if it's
sand/bead blasted b4 coating...

a friend of mine had his WRX wheels coated,
he acidentally drop the wrench onto his wheel while
rotating tires....and chipped an area...
he told me he powdercoated on his existing factory paint.

my painter wasn't sure if the RX8's paint can withstand the
heat in the oven...so he also adviced me to
sandblast my wheels, even though they were new wheels

as for colour matchin' the center cap,
i gave up....too hard to colour match my cap...
so i j/ made the cap and nuts all black mica (gun metal + flat black + clear coat)

Garu
07-18-2007, 10:17 PM
What about the emblem? How did you make the paint to stick?

yellowmp5
07-18-2007, 10:21 PM
What about the emblem? How did you make the paint to stick?

i plied the emblem out, and superglued the emblem back on,
and siliconed the tabs (at the back) when the superglue is dried off
.

aznkid.com
07-18-2007, 10:57 PM
Looks great! How long did it take?

Ex-Rolla
07-18-2007, 11:23 PM
Sorry, i didn't quite understand your response to the sandblasting question. Did the same guy sandblast them? or did you take it someplace else and then take it to get it powdercoated. i plan on doing this over the winter when my steelies are on. Thanks!

kid_icarus
07-19-2007, 08:47 AM
I'd also like to know if the same guy sandblasted.

Overall how much did the whole procedure cost you?

$150? for powder coating?
then $250 for clearcoating?
how much for sandblasting?

Since your wheels are new, you probably didn't need to pay anyone to remove the tires for you correct?

ParsM3GT
07-19-2007, 08:49 AM
Do you know the company name and exact address? I live 5 minutes from there. I plan on getting them done over the winter.

Garu
07-19-2007, 09:04 AM
Took 2 days for the powder coating + clear coating.

He doesn't do sandblasting, you have to get them done from somewhere else.

$150 for the first coat.
$250 if you want to two layers of coating. Powder coating + clear coat.

When he took a look at my rims, he said the rims don't need sandblasting. He also said if I didn't like the result, he would redo it without charge.

Quy's Coating 1 Inc
14 Regan Road 2A
Tel: 905-840-6040
Cell: 416-219-9463

Tell him Brandon sent ya and he'll take care of you. :)

kid_icarus
07-19-2007, 09:19 AM
Took 2 days for the powder coating + clear coating.

He doesn't do sandblasting, you have to get them done from somewhere else.

$150 for the first coat.
$250 if you want to two layers of coating. Powder coating + clear coat.

When he took a look at my rims, he said the rims don't need sandblasting. He also said if I didn't like the result, he would redo it without charge.

Quy's Coating 1 Inc
14 Regan Road 2A

Tell him Brandon sent ya and he'll take care of you. :)


Wow so he told you not to sandblast?
Either way the rims looks really good. How's the feel/texture? is it silky smooth or slightly grainy?

SO BASICALLY
$250 in total for BOTH powdercoating AND clearcoating?
That's a pretty good deal

Garu
07-19-2007, 09:26 AM
Silky smooth, not even close to being grainy.

And yes $250 for BOTH powder coating AND clear coating.
That sparkling stuff on wheels that is clear coating.

EvilDeadFan
07-19-2007, 09:34 AM
What, no finished pics with them mounted on the car? Where's the thumbs down smiley?? :P

ParsM3GT
07-19-2007, 09:35 AM
Good deal thx Garu.

Of course now that I wanna get them done i have no spare wheels to put on my. I just sold my OEM wheels a week ago. :(
Oh well.

kid_icarus
07-19-2007, 09:56 AM
Good deal thx Garu.

Of course now that I wanna get them done i have no spare wheels to put on my. I just sold my OEM wheels a week ago. :(
Oh well.

like yourself i will have to wait for winter

I hope quy can still offer the same price at that time! =)

how much is it typically to have your tires removed from the rims?

ParsM3GT
07-19-2007, 10:04 AM
like yourself i will have to wait for winter

I hope quy can still offer the same price at that time! =)

how much is it typically to have your tires removed from the rims?

I`m not sure about that.

MattC
07-19-2007, 11:01 AM
Depending on where you go, last winter when i got mine taken off to put my winters on my stock rims it only cost around 60$

I think Jimmy does it for cheap, maybe even cheaper than that.

Caz
07-19-2007, 11:13 AM
MattC Have you picked up Steelies for this winter? i think they would pay fro themselves pretty quick if you didin't have to pay for the swap of the rubber twice a year. If you like the look of the OEM rims and want that look year round that is cool.

Garu
07-19-2007, 11:20 AM
What, no finished pics with them mounted on the car? Where's the thumbs down smiley?? :P

Heh.. I'm so itching to put them on, but I need to get myself good set of tires.

Cardinal Fang
07-19-2007, 11:27 AM
When he took a look at my rims, he said the rims don't need sandblasting.

This makes me nervous. The idea behind the sandblasting is to get rid of any coatings or impurities that may block the adhesion of the new paint to the rims. The way the new application finish has a better chance of remaining without chipping.



He also said if I didn't like the result, he would redo it without charge.

That's great but by redoing does he mean he will strip away the previous finish down to the aluminum and repaint them? Or will he just redo what he previously did?

WLS ZMZM
07-19-2007, 11:34 AM
those rims are lookin really good!! and 250 for powdercoating and clear coat... is an amazing deal... hopefully we will be able to get this same price during the winter... when i have my oem's off so i can get them painted royal bronze....

Garu
07-19-2007, 11:45 AM
This makes me nervous. The idea behind the sandblasting is to get rid of any coatings or impurities that may block the adhesion of the new paint to the rims. The way the new application finish has a better chance of remaining without chipping.



That's great but by redoing does he mean he will strip away the previous finish down to the aluminum and repaint them? Or will he just redo what he previously did?

Yes that is the idea behind the sandblasting. However after he took a look at the rims in person, he said sandblasting is recommended but not needed for my set of wheels. It might be needed for your wheels. I trust his decision, I'm guessing he's been coating all sorts of metals for awhile.
I think there are some people who didn't do the sandblast before the powder coat. (TheBiz for example...)

Like I said, he doesn't sandblast. So you need to take them rims and strip away the previous finish down to the aluminum from some place else and bring it back and he'll redo the coats without additional charge.

I was happy with how the wheels turned out so I didn't complain.

Garu
07-19-2007, 11:47 AM
those rims are lookin really good!! and 250 for powdercoating and clear coat... is an amazing deal... hopefully we will be able to get this same price during the winter... when i have my oem's off so i can get them painted royal bronze....

He will do the job at that price. Just mention my name and that you're part of mazda club. :)

WhiteSpeed3
07-19-2007, 12:01 PM
wow i guess my idea for the rx-8 powdercoated on a white speed is taken

but they look good and will look even better on the car

kid_icarus
07-19-2007, 12:05 PM
i wonder if he'd tell me my stock MS3 rims will need to be sandblasted....

like what determines whether you should or not? i mean i'm curious what his decision is based on?

Garu
07-19-2007, 01:21 PM
wow i guess my idea for the rx-8 powdercoated on a white speed is taken

but they look good and will look even better on the car

:chuckle
Welp, I don't have them on the car yet.

chinsterr
07-19-2007, 03:52 PM
SO BASICALLY
$250 in total for BOTH powdercoating AND clearcoating?
That's a pretty good deal

errr, i got mine chemically stripped/ powdercoated / clear coated for $250.

The powdercoater is a member of the nissan240 forums , handle is "JEDI". Only thing is that his shop is in waterloo. Worth the drive to do it. I wasnt happy with them the first time around so he did them until i was.

But my clearcoat doesn't have sparkles like that. Looks good garu!

kid_icarus
07-19-2007, 03:55 PM
errr, i got mine chemically stripped/ powdercoated / clear coated for $250.

He is from the nissan240 forums , handle is "JEDI". Only thing is that his show is in waterloo. Worth the drive to do it. I wasnt happy with them the first time around so he did them until i was.

But my clearcoat doesn't have sparkles like that. Looks good garu!

EVEN better!

Waterloo isin't a big deal for me.
But I don't want to go back and forth if the job isin't done right the first time.

Does he have a contact other than me going onto the forums to get him?
Shop name?

sp3GT
07-19-2007, 05:43 PM
You can't powdercoat rims for a leased car rite? I really want to do it but I'm not 100% sure if I'm going to keep the car.

EvilDeadFan
07-19-2007, 05:50 PM
Of course you can for a leased car. Just tell them that some punks spray painted your rims orange, or whatever you wanted to tell them, and that factory colour just wasn't your style, or whatever. As long as it's a quality job, and looks good.

yellowmp5
07-19-2007, 06:03 PM
You can't powdercoat rims for a leased car rite? I really want to do it but I'm not 100% sure if I'm going to keep the car.

ask jeff, thebizz, or ask your dealership

or

spary paint them back (OEM colour) a week b4 u return your ride...
and hope you get lucky~ lol

chinsterr
07-19-2007, 06:04 PM
EVEN better!

Waterloo isin't a big deal for me.
But I don't want to go back and forth if the job isin't done right the first time.

Does he have a contact other than me going onto the forums to get him?
Shop name?

sent you the info

Ex-Rolla
07-19-2007, 06:32 PM
Thanks for the info Garu!

doughboyr6
07-21-2007, 10:36 AM
i want my calipers powder coated....but can't be without a car of days...

albvision
02-09-2017, 07:34 PM
I got my hands on RX-8 rims last week. I was shopping around to get the rims powder coated. I called this place called 'K&M metal coating' and they told me that they don't take 'small business' and gave me a number.
I called the number this guy named Quy told me to come in and he'll do the whole set for $150.

His office hours are 7:30 am to 3:30pm, but he said I can call him whenever I finish my work and he can drop by the shop for me. Very nice guy, he will try everything to take care of you. I asked him about the clear coating he said he would charge $250, if I'm doing the second coat.

Anyways after 2 days, he told me they were ready, I picked them up, here is the result.

Amazing result at amazing price. I highly recommend this guy if you want powder coating job done to your rims.

He's located at Brampton near Main st & Bovaird. His cell phone number is 416-219-9463. Tell him Brandon sent you and you're part of the club, he'll give you a deal.


I just did it today. I did an set of rims of (4) , 3 years ago too and the payment was reasonable ($450). Today I did only one rim (5 flat spoke) and I paid almost $300.00.. Very expensive for just one rim, beside that is really far way up almost to Caledon city. Be careful before you bring the rims there, you better ask first how much would it cost.

cwp_sedan
02-10-2017, 05:05 PM
I just did it today. I did an set of rims of (4) , 3 years ago too and the payment was reasonable ($450). Today I did only one rim (5 flat spoke) and I paid almost $300.00.. Very expensive for just one rim, beside that is really far way up almost to Caledon city. Be careful before you bring the rims there, you better ask first how much would it cost.

Kind of dumb you didn't ask the price before going there. Setup is key so it's cheaper per rim to do 4 rims than it would be to do 1.

Also kind of strange you are complaining about the distance even though you still went there lol.