TurboEight
11-10-2007, 11:43 PM
Well, I did the DRL Disable.
But not working like it should.
I had them wired up before this way and I want the same way back.
NOW:
1. Driving lights are OFF if the light is at AUTO and there is light outside.
2. Driving lights are OFF if the knob is at OFF position.
3. FULL power headlight if on AUTO light and dark outside.
4. FULL power light turning the light once and twice.
Before:
the difference was that DRLs are STILL off if i turn the switch ONCE.
But the interior light go on.
NOW.....
lights come on when i turn it ONCE.
WHY I want to to this.
I have angel eyes. and i sometimes want to leave the HEADLIGHTs OFF because it looks better.
BUT I still want my interior lights on, at night obviously....
I wired it up using the
87 Relay.
TAPPING into the Orange Blinker wire.
Link to the way I did it. http://www.torontomazda3.ca/forum/showthread.php?t=12150
Please help.
EDIT: Basicly Headlights only turn on After turning the switch to stage II
But not working like it should.
I had them wired up before this way and I want the same way back.
NOW:
1. Driving lights are OFF if the light is at AUTO and there is light outside.
2. Driving lights are OFF if the knob is at OFF position.
3. FULL power headlight if on AUTO light and dark outside.
4. FULL power light turning the light once and twice.
Before:
the difference was that DRLs are STILL off if i turn the switch ONCE.
But the interior light go on.
NOW.....
lights come on when i turn it ONCE.
WHY I want to to this.
I have angel eyes. and i sometimes want to leave the HEADLIGHTs OFF because it looks better.
BUT I still want my interior lights on, at night obviously....
I wired it up using the
87 Relay.
TAPPING into the Orange Blinker wire.
Link to the way I did it. http://www.torontomazda3.ca/forum/showthread.php?t=12150
Please help.
EDIT: Basicly Headlights only turn on After turning the switch to stage II