Pre-installed Angel eye headlights on ebay!

[Jeff-TheBiz]

Clickity Click Click. (http://cgi.ebay.com/ebaymotors/04-05-06-MAZDA-3-MAZDA3-CCFL-HALO-PROJECTOR-HEADLIGHTS_W0QQcmdZViewItemQQcategoryZ33710QQihZ00 3QQitemZ130203103147QQrdZ1QQsspagenameZWDVW)

http://www.revotec-usa.com/product/headlight/LP-MMZ303BBR-A.jpg

[S.F.W.]

seriously considering this.

[FLIPDADY]

Well it's about time. I remember getting a set of projector headlamps for my Civic a few months after the 99 bodystyle came out.

No love for hatch owners.

[Kevin@nextmod]

keep in mind that the projector is probably crappier then the stock ones. Meaning cut off will be sh*tty

[3GFX]

seriously considering this.

S**T!!!! At that price so am I!!!!


keep in mind that the projector is probably crappier then the stock ones. Meaning cut off will be sh*tty

Good Point!!! I wonder how the cutoff is. More importantly I wonder if it doesn't shake like stock.

[dentinger]

i would imagine its pretty much a stock headlight, with an installed angel eye...

[3GFX]

From the looks of it, yea. It'd be nice to get a picture of the back of the housing to see the back of the project to see if it has a cutoff like the stock housing.

[Stylus_MZ3]

+1 just to bad its not duel angel eyes

[Niteshade]

+1 just to bad its not duel angel eyes

Agreed!

Wishful thinking: would love to see someone make something like this using the stock xenon HIDs (or a reasonable facimile) that are coming with the new 2008.5 Sport:hawt

That being said, anyone know if those stock HIDs could be ordered to replace the halogens in an 07-08 hatch and, if so, what Mazda would charge for em?

[Gizzmo_jr]

http://i213.photobucket.com/albums/cc238/pjmcgui/DSC02102.jpg (http://www.mazda3forums.com/index.php?topic=104034.0)
Click picture for M3F topic


It'd be nice to get a picture of the back of the housing to see the back of the project to see if it has a cutoff like the stock housing.
Soon pics of the cutoff but,

as far as the projectors, unfourtunately, i dont think they're quite as good as the oem ones.
-The author on M3F (http://www.mazda3forums.com/index.php?topic=104034.msg2116079#msg2116079)

[yearoftherat]

Damn You Sedan Owners !!!!!

[Jeff-TheBiz]

Damn You Sedan Owners !!!!!

HA HA...

:gone

[BETRTHNU]

Thread Necromancing, but I just picked these up...should be installed by the end of next week. It looks almost identical to the stock OEM headlight.

[S.F.W.]

Thread Necromancing, but I just picked these up...should be installed by the end of next week. It looks almost identical to the stock OEM headlight.
how much was shipping? What carrier?

[BETRTHNU]

$191USD + $65USD shipping+$41CAD duties/brokerage with UPS = Just under $300 CAD Got to love that exchange rate.

[BETRTHNU]

here is the seller on ebay. Shipping was uber fast.

http://cgi.ebay.com/ebaymotors/04-05-06-MAZDA-3-MAZDA3-CCFL-HALO-PROJECTOR-HEADLIGHTS_W0QQcmdZViewItemQQcategoryZ33710QQihZ02 5QQitemZ380029468339QQrdZ1QQsspagenameZWDVW

[3GFX]

Can you take a picture of the back? I've contemplated getting these. I'm wondering if they have the same "jiggle" issue as stock.

[skunk2]

off topic - but if anyone wants to get rid of their stock headlights after getting these pre angel eyed units please let me know.

[mleblond]

man aren't stock headlights are like 300+ each? Flip?

[S.F.W.]

I think I will contact them, see if they are willing to ship something other than UPS. Anyone else interested? Maybe group shipping discount?

[BETRTHNU]

Can you take a picture of the back? I've contemplated getting these. I'm wondering if they have the same "jiggle" issue as stock.

I will when I get back from MTL on Monday...I've never had a "jiggle" issue with my headlights.

[3GFX]

Sometimes the 04-06 models that didn't originally have HIDs and then installed HIDs hand issues with "jiggle" under the cutoff in the beam pattern when there were vibrations in the road such as bumps and expansion joints. The actual housing isn't fully secured to the point where it won't move so jiggling occurs. It happens with stock bulbs too but is more noticible with aftermarket HIDs.

[mEtH]

Yah I had that problem on my '04 but mind you most of it was caused from the suspension. I cant say I have had that problem anymore in my '08.

[Pimpin_29y]

Looks good...I am wondering if the bulb housings are the same? I have HIDS that I wouldn't want to lose.

Any more pics?

[cwp_sedan]

FIT: 2004 -2008 MAZDA 3 4DR/SEDAN (HALOGEN TYPE ONLY)

DO NOT FIT : MAZDA3 4DR/SEDAN W/ FACTORY HID/XENON KIT & 5DR HATCHBACK

I have to assume that they are still using H7 for the low beams. It says plug and play for OEM halogens so you should be good Gabe. I would double check for sure though.

Anyone in for a GB on these? :chuckle
:gone

[3GFX]

If the group buy gets em to an even better price I might be in.

[S.F.W.]

I am in for a GB. Even if the base price was the same, but we could save on customs/shipping.

[Mazda3Man]

id be in too.. but im in calgary =(

[S.F.W.]

bump. Anyone else interested?

[3GFX]

Potentially. On the side of no, but if we get a bunch and the price gets a little lower.

[Hypothrml]

I'm interested as well!

[S.F.W.]

ok, I emailed the ebay seller. He said he can ships USPS for $63.00 US. He said he would consider a group discount, but we would need 5-10 interested people.

[Dragazn]

Just wondering how long these angel eyes would stay working. I had angel eyes on my 6 and there was constantly something wrong with it. Had to fix it time after time. Maybe these ones are more stable and installed better?

[monty0501]

I would have loved to get these, but it looks like it wont work for headlights with HIDs...

Darnitttt!

[bubba1983]

one ring? thats so thinline!! hahahahah oh snap!!!

[S.F.W.]

I would have loved to get these, but it looks like it wont work for headlights with HIDs...

Darnitttt!

why not? You would just install your HID's as normal.

[monty0501]

why not? You would just install your HID's as normal.

To be honest, I dont really know :S I'm just going off the requirements here:

FIT: 2004 -2008 MAZDA 3 4DR/SEDAN (HALOGEN TYPE ONLY)

DO NOT FIT : MAZDA3 4DR/SEDAN W/ FACTORY HID/XENON KIT & 5DR HATCHBACK

Is there a difference in the housing?

[Jeff-TheBiz]

DO NOT FIT : 5DR HATCHBACK

Is there a difference in the housing?

Has nothing to do with the HIDs on your car, but I am pretty sure that any 07/08 that has OEM HIDs will be out of luck as well, because the Ballast for the OEMs are in the existing headlight assembly... IIRC

[monty0501]

Ah shoot, the dream is over for me.