Tri-City Area (Kitchener/Waterloo/Cambridge or Guelph)

[CH0SiiN1]

If your referring to mine.. I know man.. but I think she still looks good.. I have 3 daughters and a skinny wallet :(
... Please donate as little as a cup of coffee per day to the Slam Khemz MZ3 foundation.. Put a smile an a young mazda's grill lol

[SomeGuy]

If your referring to mine.. I know man.. but I think she still looks good.. I have 3 daughters and a skinny wallet :(
... Please donate as little as a cup of coffee per day to the Slam Khemz MZ3 foundation.. Put a smile an a young mazda's grill lol

Just snag a set of prokits, you can find them for under $200 usually

[CH0SiiN1]

Really? That would be nice.. please let me know if you hear of some going for cheap,
Thanks.

[wip]

Really? That would be nice.. please let me know if you hear of some going for cheap,
Thanks.

if u barder with nextmod u can get brand new ones or sportlines for 240 thats where i got mine from for that price and just install them urself to save money

[chris.joh]

Just snag a set of prokits, you can find them for under $200 usually

Cut your springs lol

[Burner]

LoL that's a car that is in desperate need of being lowered if I ever saw one...

So does this mean your finally lowering the speed?

[SomeGuy]

So does this mean your finally lowering the speed?

I'm not in desperate need...the stance on the speed 3 stock isn't brutal.

[Burner]

I'm not in desperate need...the stance on the speed 3 stock isn't brutal.

So that's a maybe? Hehe

[-ToM-]

Cut your springs lol

+1 ;)

[3GFX]

http://cl.jroo.me/z3/r/r/z/d/a.aaa-lower-it-or-god-will-do-it-f.jpg

[CH0SiiN1]

http://cl.jroo.me/z3/r/r/z/d/a.aaa-lower-it-or-god-will-do-it-f.jpg

Damn I better get on it, want catback 1st though

[CH0SiiN1]

Please join my group "AREA 51-9" in tm3 groups, its for anyone with a 519 area code, thanks, much appreciated

[SomeGuy]

Please join my group "AREA 51-9" in tm3 groups, its for anyone with a 519 area code, thanks, much appreciated

Uh? Wtf? No.

[greyseason]

I'm in Kitchener too

[The Wolf]

Does anyone (I'm looking at you Bubba) know where I can get 12 point sockets locally?

[SomeGuy]

Does anyone (I'm looking at you Bubba) know where I can get 12 point sockets locally?

What sizes? They're available everywhere...princess auto (powerfist), sears (craftsman), canadian tire (mastercraft) would be your best bets for singles and relatively cheap. If you just need it for one specific job drop by sometime, I have 12 points in a bunch of smaller sizes 7-22mm and up to 7/8" in standard. If you need big sizes, TSC has a 3/4" drive set with 12 point sockets on for $60 this weekend.

[The Wolf]

I had a hard time finding them when I was at Canadian Tire. I don't need a whole set, so I'm hoping to either borrow one, or buy a full set and return it when I'm done :chuckle

I need 8mm for putting my summer wheels back together. If you have that size and are willing to rent it out to me for a weekend, I would be really grateful.

[SomeGuy]

I had a hard time finding them when I was at Canadian Tire. I don't need a whole set, so I'm hoping to either borrow one, or buy a full set and return it when I'm done :chuckle

I need 8mm for putting my summer wheels back together. If you have that size and are willing to rent it out to me for a weekend, I would be really grateful.

Oh in that case...
http://www.canadiantire.ca/AST/browse/FathersDay/Handyman/PRD~0589173P/Mastercraft+Maximum+17-piece+Drive+Socket+Set.jsp?locale=en
Is on sale starting tomorrow for $19...just go buy it, same set that I have with that kick ass extendable flex head ratchet and comes with all 12 point sockets including 8mm.

[CH0SiiN1]

Uh? Wtf? No.

why? is there already a 519 crew? if so my bad..

[SomeGuy]

why? is there already a 519 crew? if so my bad..

We don't need a "crew"?

[The Wolf]

Okay okay... No need for aggression.

519 is a massive area code territory. There's a KW/Cambridge group and a London and area group. That seems to work pretty well.

[Burner]

Anyone know someone locally that drives a blue first gen hatchback with an offset front plate, black painted stock wheels and stickers covering the rear window? Passed him today on a train in Cambridge at 12:30 as he was parking next to the tracks.

[FD22]

Was just driving behind a gen1 CWP MS3 down Fischer-Hallman till Erb. All I could notice from the back were rims and possibly an exhaust. Think I saw yellow fogs too. Anyone on here?

I also frequently see a black gen1 sedan around UW campus area. Looks pretty much stock with the exception of rims. Not sure exactly what rims, but they've got a red lip. Anyone?

[wip]

Anyone know someone locally that drives a blue first gen hatchback with an offset front plate, black painted stock wheels and stickers covering the rear window? Passed him today on a train in Cambridge at 12:30 as he was parking next to the tracks.

yah thats me thats where i work once in a while

[Burner]

yah thats me thats where i work once in a while

Car looks good!

[bubba1983]

why? is there already a 519 crew? if so my bad..

dont listen to that loose lip asshat, jus ignore his shit

[CH0SiiN1]

Ok.. my group is for brantford then.. I used "crew" meaning as group, not a gang or something, sorry I offended you, I wont post here.. Peace

[SomeGuy]

dont listen to that loose lip asshat, jus ignore his shit

Bahaha says the grumpy ol' man

[standsideways]

Was just driving behind a gen1 CWP MS3 down Fischer-Hallman till Erb. All I could notice from the back were rims and possibly an exhaust. Think I saw yellow fogs too. Anyone on here?

I also frequently see a black gen1 sedan around UW campus area. Looks pretty much stock with the exception of rims. Not sure exactly what rims, but they've got a red lip. Anyone?

My old sedan has black re30 replicas with red lips.

We just threw the gv lip back on it and adjusted the coils. Hes all over with that thing.

[m_bisson]

I just moved back to KW from Brantford. I was going to Laurier there.

[standsideways]

I just moved back to KW from Brantford. I was going to Laurier there.

you moved to brantford to go to laurier? LOL

[Reddie1337]

you moved to brantford to go to laurier? LOL

laurier brantford campus. that does exist.

[standsideways]

laurier brantford campus. that does exist.

ohhh

[SomeGuy]

*looks around*

[Reddie1337]

*looks around*

Yes Ryan? What are we looking for? A wing night? or a meet of some sort?

[SomeGuy]

LoL just bumping the thread?

[bubba1983]

He lacks attention....

[SomeGuy]

He lacks attention....

It's lonely living by myself sometimes

[Reddie1337]

It's lonely living by myself sometimes

Frequent bars? Try or organize a meet more often? Have more Nator days? People go to your house for that :P

[Burner]

New ride...

http://i712.photobucket.com/albums/ww130/mazdubb/IMG_0500.jpg

[The Wolf]

It's lonely living by myself sometimes

pof.com


New ride...

http://i712.photobucket.com/albums/ww130/mazdubb/IMG_0500.jpg

cereal?

[mParsonz]

Hey everybody :D new to the forum and Mazda's and from Kitchenerrrr!

Picked up my 2012 Mazda 3 Sport 2 weeks ago (:
http://img545.imageshack.us/img545/772/stockrideheight.jpg (http://imageshack.us/photo/my-images/545/stockrideheight.jpg/)

[mParsonz]

Hey everyone, just got my first Mazda.. a 3 Sport, 2 weeks ago :D & I live in Kitchener :chuckle

tried to post a pic but I'm unable to ;(

[Burner]

cereal?

It's a rental while my car is in the shop. I've had it for the last week and already put over 2k km's on it. I hate it...

[mParsonz]

anyone know a place that tints taillights around here? i want actual vinyl not just spray crap.. just haven't heard of a place that does that...?

[bubba1983]

Geez so many new locals. Where were you all 8 years ago lol

[mParsonz]

uhhhhh well I was grade 5? 8 years ago ;)

Damnit Bubba your avatar keeps making me want to smack my screen, no joke lmao.

[bubba1983]

Grade 5. Haha nice. Ur the youngest local by far then. Avatar rocks

[The Wolf]

anyone know a place that tints taillights around here? i want actual vinyl not just spray crap.. just haven't heard of a place that does that...?

You can try ordering vinyl from Sechemedia.can and DIY

[mParsonz]

Grade 5. Haha nice. Ur the youngest local by far then. Avatar rocks

LOL really wow :P most people don't believe me when I tell them its MY Mazda 3 :) Thanks man yours too :cool


You can try ordering vinyl from Sechemedia.can and DIY

I was thinking of DIY just I've read that the Gen2 tails are a nightmare to vinyl..

[The Wolf]

I was thinking of DIY just I've read that the Gen2 tails are a nightmare to vinyl..

Yep I've heard that too haha

[wip]

anyone know a place that tints taillights around here? i want actual vinyl not just spray crap.. just haven't heard of a place that does that...?

have u every tryed the spray stuff? if done properly and not rushed it can look prettty good!

[Mitchell3]

LOL really wow :P most people don't believe me when I tell them its MY Mazda 3 :)
best feeling hahaha. I enjoyed every moment of it with this car back when i was in grade 11.

Welcome!

[mParsonz]

have u every tryed the spray stuff? if done properly and not rushed it can look prettty good!
I did it on my first car, it looked amazing but I did it way too dark so even at night my lights were barely visible :P I think its definitely a cheaper alternative, maybe even using a clear coat too? Obvioously not going to go pitch black again.

best feeling hahaha. I enjoyed every moment of it with this car back when i was in grade 11.

Welcome!

Haha its awesome :P now all I need to do is make it unique so everybody knows its mine ;)

Thanks man!

[bubba1983]

Plans for mods?

[mParsonz]

Plans for mods?

Well I got my Eibach PK 2 days ago, just need time to put them in.. Then I will be looking for some rims. white emblems, tint tailights.. was thinking of an LED DRL kit, just won't have a highbeam then I'm assuming? which kinda sucks. Doing LED lights all around (signals, brake, reverse, and some inside like dome) I'd like an exhaust system, cold air intake, but the guy at Mazda said I'd probably void my warranty by doing any sort of engine mods? Need more clarification on that though because they probably cost a lot for that kind of work.. Not sure what else though. I have a JBL 700w amp, blew my sub though.. might get a new one ;)

[mParsonz]

Wow, finally seen your car on the road for the first time :P Kind of ironic since I showed my girlfriend your car.. and said I've never seen it before haha :P

Seen you out near Max's Driving Range/Mini Golf at 7:45ish? sickkk ride bro

[mParsonz]

Damnit.. sorry guys not trying to spam D: last post directed at Mitchell3. Can't edit my posts yet though :( SORRY!

[SomeGuy]

looool funny guy.

Get bubba to install your springs, he's pro :)

[The Wolf]

SomeGuy will do it for free

[SomeGuy]

SomeGuy will do it for free

I don't do shit...lol I just watch other people install their springs in my garage.

[SomeGuy]

Well I got my Eibach PK 2 days ago, just need time to put them in.. Then I will be looking for some rims. white emblems, tint tailights.. was thinking of an LED DRL kit, just won't have a highbeam then I'm assuming? which kinda sucks. Doing LED lights all around (signals, brake, reverse, and some inside like dome) I'd like an exhaust system, cold air intake, but the guy at Mazda said I'd probably void my warranty by doing any sort of engine mods? Need more clarification on that though because they probably cost a lot for that kind of work.. Not sure what else though. I have a JBL 700w amp, blew my sub though.. might get a new one ;)

Some actual comments...don't bother with LED DRL, not a good move if you lose your high beams.
Corksport has a full interior LED light kit that's pretty decent.
Exhaust/Intake most dealers don't really care about, Forbes in particular are pretty easy going about mods. Look at the shit in my sig...was at Forbes this week for regular service and was shooting the shit with Chad and he was all pretty positive about it.

[The Wolf]

+1, the guys at forbes were stoked on my mods lol

[mParsonz]

damn free spring install? that'd be great ;) LOL

Nice, it was only a salesman that told me engine mods should be done at Forbes.. But I was planning on stopping in next Wednesday to ask em about it, and maybe drop off a resume :D haha


Some actual comments...don't bother with LED DRL, not a good move if you lose your high beams.
Corksport has a full interior LED light kit that's pretty decent.
Exhaust/Intake most dealers don't really care about, Forbes in particular are pretty easy going about mods. Look at the shit in my sig...was at Forbes this week for regular service and was shooting the shit with Chad and he was all pretty positive about it.

nice to know about those LED DRL's, I wasn't too sure to begin with. and the LED interior kit is actually pretty awesome, I took a look at that earlier haha
Thanks man :D

[Mitchell3]

+1, the guys at forbes were stoked on my mods lol
hahaha yes i experienced that as well last time. A pleasant change from the negative attitude I'd get from Guelph city.


Wow, finally seen your car on the road for the first time :P Kind of ironic since I showed my girlfriend your car.. and said I've never seen it before haha :P

Seen you out near Max's Driving Range/Mini Golf at 7:45ish? sickkk ride bro

Thank you! if your out there often you will see me all the time. I pass it like 4 times a day.

[SomeGuy]

damn free spring install? that'd be great ;) LOL

Nice, it was only a salesman that told me engine mods should be done at Forbes.. But I was planning on stopping in next Wednesday to ask em about it, and maybe drop off a resume :D haha



nice to know about those LED DRL's, I wasn't too sure to begin with. and the LED interior kit is actually pretty awesome, I took a look at that earlier haha
Thanks man :D

Just go to bubba if you don't want to DIY, he's cheaper than any actual shop...and just as grumpy lol


And heck no, they don't care where the mods are done. Talk to the guys in service if anything, they're way cooler lol


I might actually be ordering a few things from corksport soon, so maybe we can do a little kw group buy? I know chris.jon was somewhat interested in their FMIC too. Anyone interested?

[bubba1983]

SomeGuy will do it for free

People are so cheap these days

[klspeed3]

Some actual comments...don't bother with LED DRL, not a good move if you lose your high beams.
Corksport has a full interior LED light kit that's pretty decent.
Exhaust/Intake most dealers don't really care about, Forbes in particular are pretty easy going about mods. Look at the shit in my sig...was at Forbes this week for regular service and was shooting the shit with Chad and he was all pretty positive about it.


+1, the guys at forbes were stoked on my mods lol


+2 on these...Chad seems to really love the MS3s especially, he was chatting with me about my rims and such the last time i was in there as well

[klspeed3]

on another note, is that red gen 1 MS3 (blacked out emblems) i saw driving down university Weds afternoon on these boards?

[CH0SiiN1]

Im sure you guys know, hamilton is having a meet on sunday june 24 starting at 2-3pm and will be including some from the mazda6club, please see thread:

http://www.torontomazda3.ca/forum/showthread.php?64103-Hamilton-Bayside-Meet&p=960521&highlight=#post960521

[SomeGuy]

Spotted a 2nd gen blue sedan with Axela badges and a few other things on ottawa by homer watson just around noon...anyone here?

[Fayvir]

saw a blue 1st gen parked at uw plaza on wednesday around 5pm. behind mongolian grill, had tm3 plates

[Burner]

Got my car back. New paint!

http://i712.photobucket.com/albums/ww130/mazdubb/IMG_0501.jpg

[CH0SiiN1]

Got my car back. New paint!

http://i712.photobucket.com/albums/ww130/mazdubb/IMG_0501.jpg

Thats mint!!

[The Wolf]

Wow dude, looks amazing! How much did that set you back? Lol!

[Burner]

$500 over the insurance quote to fix my roof.

[FD22]

Saw a gen2 CWP (Speed?) at Sobeys on Columbia and Fischer-Hallman about 15mins ago. Noticed exhaust and what seemed to be homemade mudflaps. Car looked lowered as well. Anyone?

[standsideways]

on another note, is that red gen 1 MS3 (blacked out emblems) i saw driving down university Weds afternoon on these boards?

I know him, hes not on the forum.

He just had hotchkis front an rear sways done at point zero, that wouldhae been when you saw him out there.

edit: rally armors,stance coils, hotchkis sways,intake, exhaust,black emblems, evil M rear, cobb decal.

[Reddie1337]

$500 over the insurance quote to fix my roof.

Ouch! Well, that's a deductible. Got it done at Elgin North? I posted a pic on the sightings thread looking for you :P looks sharp man! Love the rims. That's what caught my eye as I drove past, then saw the TM3 plate cover.

[bubba1983]

Got my car back. New paint!

http://i712.photobucket.com/albums/ww130/mazdubb/IMG_0501.jpg
an old old G of the board comes to mind when i see this pic...autoexe

[Burner]

Ouch! Well, that's a deductible. Got it done at Elgin North? I posted a pic on the sightings thread looking for you :P looks sharp man! Love the rims. That's what caught my eye as I drove past, then saw the TM3 plate cover.

Yeah it's actually a decent deal for the price. They fixed my rusting fenders and some dents that I had. They also covered up the license plate holes in the front bumper and fixed a crack that was hidden behind the plate cover. Not the best paint job in the world but it's better than it was for sure.

[FD22]

At about 2pm today, spotted a gen2 black hatch in the CIF parking lot at UW. Tints, rims, Axela badge. Anyone?

[Reddie1337]

Yeah it's actually a decent deal for the price. They fixed my rusting fenders and some dents that I had. They also covered up the license plate holes in the front bumper and fixed a crack that was hidden behind the plate cover. Not the best paint job in the world but it's better than it was for sure.

Yeah. They do a lot of our work, they will be doing my 2011 Red Mazda 3.

[SomeGuy]

Well this is much better news...installed the cp-e TMIC and Forge BPV today, tweaked my tune slightly (still only targeting 19psi, am not on the 20psi map yet). Car is still learning (under 50km since tuned) hence the AFR's are still a little bouncy.

http://someforum.net/DataLogs/virtualdynoplot.jpg

[stevenma188]

So close to breaking 300HP :)

[standsideways]

So close to breaking 300HP :)

Minus correction but yes nice :)

[klspeed3]

anyone experienced with aftermarket amps/subs? I installed everything myself recently, and was messing around with the gain/LPF yesterday to try and tune the bass just right...after about 15 mins the amp started getting really hot to the touch and then shut off completely...thought it may have just overheated but it still has no power as of this morning :S. Amp is an alpine pdx 1.1000.

Any ideas? Could the amp have blown without even going into protect mode once? haven't really had a chance to do too much troubleshooting (played around with the ground wires and the remote turn on wire) so haven't checked things like fuses, etc. yet....

[SomeGuy]

anyone experienced with aftermarket amps/subs? I installed everything myself recently, and was messing around with the gain/LPF yesterday to try and tune the bass just right...after about 15 mins the amp started getting really hot to the touch and then shut off completely...thought it may have just overheated but it still has no power as of this morning :S. Amp is an alpine pdx 1.1000.

Any ideas? Could the amp have blown without even going into protect mode once? haven't really had a chance to do too much troubleshooting (played around with the ground wires and the remote turn on wire) so haven't checked things like fuses, etc. yet....

I have experience, not in the mazda 3 so much but used to do a ton of installs back in the day. Chances are you just blew a fuse...and also you were probably clipping the hell out of it, most people don't have any clue about gain structure and no appreciation for balanced audio, it's just give me as much boom as possible, sad sad sad.

[klspeed3]

I have experience, not in the mazda 3 so much but used to do a ton of installs back in the day. Chances are you just blew a fuse...and also you were probably clipping the hell out of it, most people don't have any clue about gain structure and no appreciation for balanced audio, it's just give me as much boom as possible, sad sad sad.

thing is, i was actually trying to balance it out, not get "as much boom as possible". I enjoy the thump but don't need the bass drowning everything else out. I'll check the fuses first and see how that goes, thanks.

The output from my HU also seems to be a lot lower than rated, as I seem to have to set the gain pretty high to even feel any kick in the front of the car (and that's with 2 13"s)...but i suppose that's a separate issue.

Any links to some good reading on proper gain, LPF, HU equalizer settings? I found a few articles online on ways to adjust gain to the appropriate levels, but none of them were too extensive.

[SomeGuy]

thing is, i was actually trying to balance it out, not get "as much boom as possible". I enjoy the thump but don't need the bass drowning everything else out. I'll check the fuses first and see how that goes, thanks.

The output from my HU also seems to be a lot lower than rated, as I seem to have to set the gain pretty high to even feel any kick in the front of the car (and that's with 2 13"s)...but i suppose that's a separate issue.

Any links to some good reading on proper gain, LPF, HU equalizer settings? I found a few articles online on ways to adjust gain to the appropriate levels, but none of them were too extensive.

I haven't looked in a long time...so I don't have any links but it's not always just gain issues though when it comes to output, there are other things such as phasing/cancellation or poor enclosure design.

[klspeed3]

I haven't looked in a long time...so I don't have any links but it's not always just gain issues though when it comes to output, there are other things such as phasing/cancellation or poor enclosure design.

gotcha, thanks.

[klspeed3]

Definitely isn't any of the fuses...took them all out and they look fine.

Any recommendations for audio shops in the area? Futureshop is over priced (and I don't trust them to be honest)

A quick search came up with:

- Point Zero
- Boomin Car Audio


anyone have any experience with either of these places by chance?

[SupermanRitz]

I actually was just at Boomin the other day, it looks like a guy who turned his hobby into a business, BUT don't let that scare you away. He's really honest and down the Earth. Definitely trustworthy and skilled. Check him out for sure

[SomeGuy]

Definitely isn't any of the fuses...took them all out and they look fine.

Any recommendations for audio shops in the area? Futureshop is over priced (and I don't trust them to be honest)

A quick search came up with:

- Point Zero
- Boomin Car Audio


anyone have any experience with either of these places by chance?

Let me have a look and if I can fix your problem, then pay me...if not then no loss?

[klspeed3]

Let me have a look and if I can fix your problem, then pay me...if not then no loss?

I'm going to have another look myself later this evening when i have more time...only did some quick checks while i was home for lunch.

PM a price though and I'll bring it to you if I still can't figure it out?

[The Wolf]

Boomin is in the same plaza as my work. I haven't had any work done by them, but the guy is real nice and my boss highly recommends him.

[Mitchell3]

I recommend boomin as well. good guys.

[standsideways]

Definitely isn't any of the fuses...took them all out and they look fine.

Any recommendations for audio shops in the area? Futureshop is over priced (and I don't trust them to be honest)

A quick search came up with:

- Point Zero
- Boomin Car Audio


anyone have any experience with either of these places by chance?

Point zero has been doin stereo installs for 15 years in waterloo.


I think they can handle it ;)

[SomeGuy]

I'm going to have another look myself later this evening when i have more time...only did some quick checks while i was home for lunch.

PM a price though and I'll bring it to you if I still can't figure it out?

eh, like 20 bucks if it takes under an hour?

I'm just offering up a hand and am no pro...the actual places might be better.

[klspeed3]

Thanks for the recommendations all.

I'm going to give this another shot myself (HATE it when i can't figure things like this out), but i'll let you know SomeGuy, thanks again.

[turtle]

I've seen a gen 1 CWP hatch with speedy sphere wheels around the Westmount area a couple times, who you be? Car looks nice.

[mParsonz]

Little late to post this, but seen a grey 2nd gen with Canucks plateframes and blk/silver rims.. was a 2.0 not lowered... seen the car in the Boston Pizza plaza on Ira Needles last Thursday, anyone :o?

[chris.joh]

Test the waters......Is anyone is interested in a local corksport group buy? Big plans for the speed

[SomeGuy]

Test the waters......Is anyone is interested in a local corksport group buy? Big plans for the speed

We've chatted, I'll at least pick up a thing or two...definitely a set of H8 LED's but I'm still debating the OCC.

[chris.joh]

I am looking to save big on shipping, maybe the corksport rep can chirp in. If nothing comes from this I am gonna look at a custom fab kit

[SomeGuy]

I am looking to save big on shipping, maybe the corksport rep can chirp in. If nothing comes from this I am gonna look at a custom fab kit

Point him in the direction, I already talked to Derrek briefly about ordering and saving a few bucks. Would be good though if we got a few more locals too...I'm sure with the influx of new guys in kw there will be others who want stuff. Nice thing about corksport is they have cool stuff that's under $100 lol it's not like cp-e where it all costs an arm and a leg.

[chris.joh]

Point him in the direction, I already talked to Derrek briefly about ordering and saving a few bucks. Would be good though if we got a few more locals too...I'm sure with the influx of new guys in kw there will be others who want stuff. Nice thing about corksport is they have cool stuff that's under $100 lol it's not like cp-e where it all costs an arm and a leg.

Agreed, if anyone is looking for an intake or exhaust now would be the time to arrange something.

[Mitchell3]

When are you guys thinking? I've been poking around for an exhaust a little bit. Just need money lol. If I cant get the funds soon enough, might look at intake instead.

[turtle]

I'd be in for a CS local GB. I'm in the market for an intake.

[The Wolf]

Yep I could be interested in an intake as well (NA 2.3) pending price/funds/state of mind.

[klspeed3]

Thanks for the recommendations all.

I'm going to give this another shot myself (HATE it when i can't figure things like this out), but i'll let you know SomeGuy, thanks again.

figured it out...blew the inline fuse somehow...back up and running!

[klspeed3]

Also, I may be down for a CS GB as well...bout time i got an intake and maybe some of their shifter bushings at the same time.

[SomeGuy]

Also, I may be down for a CS GB as well...bout time i got an intake and maybe some of their shifter bushings at the same time.

Cool! Definitely should...

Want to buy my mspeed OCC from me? It's brand new never installed. I think I'm going to try out a different kit.

[turtle]

Should we get an idea of who's in for what? I just don't want this to end up the same as our KW meets.......haha.








not kidding. seriously.

[SomeGuy]

Sure, list it up:

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)

[CH0SiiN1]

anyone experienced with aftermarket amps/subs? I installed everything myself recently, and was messing around with the gain/LPF yesterday to try and tune the bass just right...after about 15 mins the amp started getting really hot to the touch and then shut off completely...thought it may have just overheated but it still has no power as of this morning :S. Amp is an alpine pdx 1.1000.

Any ideas? Could the amp have blown without even going into protect mode once? haven't really had a chance to do too much troubleshooting (played around with the ground wires and the remote turn on wire) so haven't checked things like fuses, etc. yet....

1st off what gauge are u running from batt to amp.. pdx 1.1000 needs 0ga wire.. if ur using 4-8ga ur amp will keep overheating and shutting down.. I install all my own audio and can help u for free.. but i live in brantford this is a very common problem that people have 1000+w amps, the amp is trying so hard to get the power it needs out of a skinny wire that it overheats its self

[CH0SiiN1]

Are you guys gonna have a meet soon? count me in if so and please do let me know

[Mitchell3]

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)

[turtle]

User - Quantity x Part Name - Part Number

1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)
5. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131

[Mitchell3]

Are you guys gonna have a meet soon? count me in if so and please do let me know

Brantford is a long drive for pretty iffy meets here that tend to get cancelled last second. However I've just gotta confirm which weekends work for me and I'll post up a roll call for a photoshoot. Probably a Sunday In July.

[SomeGuy]

1st off what gauge are u running from batt to amp.. pdx 1.1000 needs 0ga wire.. if ur using 4-8ga ur amp will keep overheating and shutting down.. I install all my own audio and can help u for free.. but i live in brantford this is a very common problem that people have 1000+w amps, the amp is trying so hard to get the power it needs out of a skinny wire that it overheats its self

Not exactly. By running a higher gauge (smaller) wire you will only be causing greater voltage drop from the battery to your amplifier. Most car audio amplifiers are pretty basic and don't do a huge amount of voltage regulation so ultimately the amp will produce less power and/or clip sooner. If you are trying to get the same sort of output, then yes it will run hotter because it will try to pull more amperage to make up for the lack of voltage to get the output you want which further lowers the voltage. Ultimately though, 4-8 gauge wire can and will run an 1000 watt amp all day long but not at it's full potential....so as long as you understand the limits it will NOT overheat or shut down.

[CH0SiiN1]

Brantford is a long drive for pretty iffy meets here that tend to get cancelled last second. However I've just gotta confirm which weekends work for me and I'll post up a roll call for a photoshoot. Probably a Sunday In July.
That would be sweet, please do let me know.. and im in the north end.. it takes 15min to get to Cambridge from my house.

[CH0SiiN1]

Not exactly. By running a higher gauge (smaller) wire you will only be causing greater voltage drop from the battery to your amplifier. Most car audio amplifiers are pretty basic and don't do a huge amount of voltage regulation so ultimately the amp will produce less power and/or clip sooner. If you are trying to get the same sort of output, then yes it will run hotter because it will try to pull more amperage to make up for the lack of voltage to get the output you want which further lowers the voltage. Ultimately though, 4-8 gauge wire can and will run an 1000 watt amp all day long but not at it's full potential....so as long as you understand the limits it will NOT overheat or shut down.

I totally agree, but for some reason the PDX 1.1000 needs no less then 0ga wire.. Its a common problem with that model, I got a MRD-M1005 (alpine 1000rms prior model) i run it with 4ga, works flawless.. then bought the pdx.. shut down within 2hrs of use.. brought it to fm audio video and the informed me of this.. so Im going off what Ive learned and been told by a installer.. anyway I rewired it with 0ga and works great.. but sold it and went back to my 1005 as i dont run a cap or kin.. and the pdx dims my lights huge.. 1005 doesnt.

[SomeGuy]

I totally agree, but for some reason the PDX 1.1000 needs no less then 0ga wire.. Its a common problem with that model, I got a MRD-M1005 (alpine 1000rms prior model) i run it with 4ga, works flawless.. then bought the pdx.. shut down within 2hrs of use.. brought it to fm audio video and the informed me of this.. so Im going off what Ive learned and been told by a installer.. anyway I rewired it with 0ga and works great.. but sold it and went back to my 1005 as i dont run a cap or kin.. and the pdx dims my lights huge.. 1005 doesnt.

Sounds to me like the old MRD-M1005 is a bit more efficient and/or more tolerant to voltage drop. Not too surprising, they probably cheaped out on the new PDX model.

[wip]

HEY GUYS! so ive seen like 3 people here saying they want short ram air intakes for there car i thought i would throw this out there because i just did this! MAKE YOUR OWN! you buy ur own tubing make one drill hole and put it all together i did it with a k and n filter it was really easy and its looks profesional and sounds unreal! and best part its wayy cheaper!

[klspeed3]

I totally agree, but for some reason the PDX 1.1000 needs no less then 0ga wire.. Its a common problem with that model, I got a MRD-M1005 (alpine 1000rms prior model) i run it with 4ga, works flawless.. then bought the pdx.. shut down within 2hrs of use.. brought it to fm audio video and the informed me of this.. so Im going off what Ive learned and been told by a installer.. anyway I rewired it with 0ga and works great.. but sold it and went back to my 1005 as i dont run a cap or kin.. and the pdx dims my lights huge.. 1005 doesnt.

i've had the amp installed for 2 weeks now using 4awg wire and the only time it has shut off on me was the other day when i was playing with the gain trying to tune it (and ultimately blew the inline fuse)...other than that, i haven't had a single problem with the 4awg wire.

Fully understand that it limits the power, just saying i have not had it go into protect/shut down yet.

[klspeed3]

Cool! Definitely should...

Want to buy my mspeed OCC from me? It's brand new never installed. I think I'm going to try out a different kit.

Will keep it in mind pending the price of the intake.

[klspeed3]

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)
5. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
6. klspeed3 - 1 x 2007-2009 Speed3 SRI (blue filter, black MAF/silicone/TIP/clamps) - Axl-6-118-100
7. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10

[chris.joh]

Yup I am in for the GB

[The Wolf]

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)
5. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
6. klspeed3 - 1 x 2007-2009 Speed3 SRI (blue filter, black MAF/silicone/TIP/clamps) - Axl-6-118-100
7. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
8. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131

[-ToM-]

whats the GB discount ?

[SomeGuy]

whats the GB discount ?

Save on shipping is the most evident one (we'll split up the costs). We might also be able to get 10% off or something as they've done on previous gb's for TM3.

SFW was talking about doing one forum wide, but I think we can manage just a kw one given the interest. I don't mind doing the ordering (or Chris might?) and being the central pickup point.

[turtle]

Wow I am impressed with the amount we're doing here.

Baller status achieved KW.

[klspeed3]

just a quick edit on mine for clarification

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)
5. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
6. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
7. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
8. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131

[stormin84]

Spotted Mitchell3 on Fisher-hallman



User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)
5. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
6. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
7. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
8. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
9. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)

[standsideways]

Jesus move the GB to the GB section

[RECREATIONAL_ANXIETY]

Saw a blacked out Gen 1 Sport last night with soccer flags (didn't see what country... it was raining pretty heavily) around Fairway / Pebblecreek area... anyone on the board?

[Mitchell3]

Spotted Mitchell3 on Fisher-hallman

finally spotted you. driving, looked over, wave, and looked back oh ya, stopped traffic lol!

[chris.joh]

Save on shipping is the most evident one (we'll split up the costs). We might also be able to get 10% off or something as they've done on previous gb's for TM3.

SFW was talking about doing one forum wide, but I think we can manage just a kw one given the interest. I don't mind doing the ordering (or Chris might?) and being the central pickup point.


I am still awaiting a confirmation that the FMIC will work with my intake

[Burner]

I might be in on the group buy.

[SomeGuy]

When does everyone want to pull the trigger on this GB? I'm thinking we should place the order in a week or two from now?

[turtle]

I'm fine with that.

[Mitchell3]

any time July is cool

[mParsonz]

I'll jump in the GB.. LED Light Kit for sure, maybe cold air...
seen Mitchell3 again, on the highway aha, took me a while to catch up ..



User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12 (-OR-)
4. Mitchell3 - 1 x SRI - Axe-6-117-21121 (Will confirm which @ cutoff date)
5. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
6. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
7. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
8. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
9. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
10. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
11. mParsonz 1 x 2010+ Short Ram Intake 2.0L Standard(blue/black/blue/black) - Axl-6-117-23131 (will confirm at cutoff)

[Mitchell3]

seen Mitchell3 again, on the highway aha, took me a while to catch up ..

http://gfxlovers.com/smilies/imgs/angels/angels002_2.gif wasnt speeding

[stevenma188]

Anyone for wings tmr night?

[S.F.W.]

If this goes through, I may order a hat...

[turtle]

Anyone for wings tmr night?

Very possible, depending on time.

[mParsonz]

http://gfxlovers.com/smilies/imgs/angels/angels002_2.gif wasnt speeding

LOL well me and my buddy in the Lancer Hatchback(if you seen him fly past you) had some black guys in a Malibu chasing us cause we cut him off LOL.

[Reddie1337]

Anyone for wings tmr night?

Yeah, what time?

[stevenma188]

7PM. Crabbys Cambridge.

1. Stevenma

[Reddie1337]

on 24? I might be a few minutes late.

1. Stevenma
2. Reddie1337 at least 1 friend
3.

[SomeGuy]

I might come, we'll see later in the day

[stevenma188]

Bump for wings tonight!

[turtle]

I'm 50/50 at this point. May have to work late.

[Mitchell3]

I'll be out of town this evening.

On a side note.. for exhaust install locally, any recommendations of places?

[stormin84]

I'll be out of town this evening.

On a side note.. for exhaust install locally, any recommendations of places?

mufflerman on westmount and highland

they did mine

[standsideways]

mufflerman on westmount and highland

they did mine

Muffler man-highland/westmount has done a few members exhausts i believe.

Minute muffler at fairway/old king did my catback on my sedan for $60.

Point zero can obviously do an exhaust install-may be a bit more at pz.

Or im sure it can be done in an hour NATOR style.

[bubba1983]

Muffletman...60bones

[Reddie1337]

On the way to Crabby's. Anyone else can show.

[Reddie1337]

Saw a 2010 or newer black 3 with 07-09 snowflakes at 9:15 at Ainslee and Parkhill in Cambridge right near food basics. TM3 plate cover on front. Anybody?

I was in a blue Cavalier. Red head. Kinda stared at you.

[-ToM-]

frig so did the wings actually happen ?

[stevenma188]

Yup haha.

[Reddie1337]

They were good today too :P We ended up going to a different one because no one was going to come, but it was still good.

[Mitchell3]

mufflerman on westmount and highland

they did mine


Muffler man-highland/westmount has done a few members exhausts i believe.

Minute muffler at fairway/old king did my catback on my sedan for $60.

Point zero can obviously do an exhaust install-may be a bit more at pz.

Or im sure it can be done in an hour NATOR style.


Muffletman...60bones

Sweet thanks, I think I should know someone at the fairway location from highschool. will check er out.

Im on a diet, probably better I couldnt make it haha.

[bubba1983]

diet...phag!

[turtle]

Sorry I missed dem wings fellas, I might be good for next Tuesday tho if we wanna try again haha.

[CH0SiiN1]

me too.. I am only good for weekends

[Mitchell3]

diet...phag!

hahaha I completely agree. I didnt want to go on this diet and I still dont. afaik the diet includes alcohol so I think I can make it lol!

Nooby question about the gb as ive never been in one before.. how will payment work?

[SomeGuy]

I'm willing to work with people but don't want to float the entire bill up front as that's a fair bit of $$ outstanding for a month or whatever it takes. Also the final shipping charges + duty and whatnot will be hard to judge until the stuff comes in so that has to be factored in. I'm thinking just a fixed amount per product...so if you're getting $200 worth of stuff, give me $150 up front and the balance + shipping piece when it comes in. Derrick from corksport also has replied to me and said he'd work with us about getting some sort of deal :)

[turtle]

That's more than fair. Should we make a cut off date for ordering and orderers need to make the deposit by that point as well?

[SomeGuy]

That's more than fair. Should we make a cut off date for ordering and orderers need to make the deposit by that point as well?

Sure, we'll set the cutoff date for July 8th.

Derrick is looking for a list of what we're getting ahead of time so he can work on the pricing...so can everyone get their thoughts squared away on what they want?

[mParsonz]

Sure, we'll set the cutoff date for July 8th.

Derrick is looking for a list of what we're getting ahead of time so he can work on the pricing...so can everyone get their thoughts squared away on what they want?

sounds goooood. If i can sell my JBL amp I'll be getting that cold air haha.

Also, how long does it approximately take to put a PK in a 2nd gen (in my driveway) :P I really want to do mine Saturday..

[Mitchell3]

Sweet. sounds good. Ill verify my order early next week, and shortly after get money to you.

[SomeGuy]

sounds goooood. If i can sell my JBL amp I'll be getting that cold air haha.

Also, how long does it approximately take to put a PK in a 2nd gen (in my driveway) :P I really want to do mine Saturday..

A PK?

[CH0SiiN1]

Im about to install my own angel eyes this weekend and would really appreciate any advice.. I know to bake on low heat and to use a heat gun to separate the lens and base.. My main concern is what sealant is best to use to avoid moisture?.. Is it a must to remove bumper?.. I cant seem to find a whole lot of info and the the instructions suck lol.. If anyone can please explain (in steps) how to do properly, I will be so thankful.. Or if your close to Brantford and you can lend a hand, I will throw you some cash for your troubles..
Thanks guys,
Khemz

[bubba1983]

funny, its in the how-to section
http://www.torontomazda3.ca/forum/showthread.php?18152-How-To-Install-Angel-Eyes-%28TM3-edition%29
follow this guide like the bible....
ive resealed mine a few times, and done a few others...this guide is your bible, read it and follow it step by step....

[standsideways]

A PK?

Prokit?

[mParsonz]

A PK?

Yeah sorry, Eibach ProKit :P

Also, anyone know if someone around here stocks PlastiDip???

[Mitchell3]

Yeah sorry, Eibach ProKit :P

Also, anyone know if someone around here stocks PlastiDip???

I found mine at home hardware. although frequently it isnt in stock I find. If it isn't they can order it in from their warehouse in a day or two.

[CH0SiiN1]

funny, its in the how-to section
http://www.torontomazda3.ca/forum/showthread.php?18152-How-To-Install-Angel-Eyes-%28TM3-edition%29
follow this guide like the bible....
ive resealed mine a few times, and done a few others...this guide is your bible, read it and follow it step by step....

Kool, thanks bubba.. I looked but never noticed that thread.. thanks again for pointing it out to me

[CH0SiiN1]

I think Id rather pay someone to do.. I hate electrical :( or Im gonna sell the angel eyes.

[SomeGuy]

I think Id rather pay someone to do.. I hate electrical :( or Im gonna sell the angel eyes.

Pay bubba to do it, he's pro...lol


As for prokits...doing it yourself in your driveway? Do you have a proper impact wrench and spring compressors and have done it before? If yes, than a couple hours, if not than all day. If you're unsure and want it done fast and right, pay bubba.

I've got time on the weekend if anyone wants to NATOR some stuff though.

[mParsonz]

I found mine at home hardware. although frequently it isnt in stock I find. If it isn't they can order it in from their warehouse in a day or two.
Yeah actually I just called the williamsburg one and they have clear,white,yellow annd red, no black.. I might just get white for my emblems if I can't find the black, and just order a can of black can too :p


As for prokits...doing it yourself in your driveway? Do you have a proper impact wrench and spring compressors and have done it before? If yes, than a couple hours, if not than all day. If you're unsure and want it done fast and right, pay bubba.

Alright, well I work in the shop at Canadian Tire, just I still live witth my parents(I'm 18 lol) andd my dad loves working on cars so, he was going to help me out.. I've got the impact and spring compressor, and he's done springs before, I was just curious on the length of the process haha :P it might be done this weekend we'll have to see.. If so I will post pictures :)

[standsideways]

Home hardware on victoria has a HUGE shelf of plastidip...looks as if no one knows it is there LOL

[SomeGuy]

Alright, well I work in the shop at Canadian Tire, just I still live witth my parents(I'm 18 lol) andd my dad loves working on cars so, he was going to help me out.. I've got the impact and spring compressor, and he's done springs before, I was just curious on the length of the process haha :P it might be done this weekend we'll have to see.. If so I will post pictures :)

Yeah, shouldn't take more than a couple hours...pretty easy to do. Hardest thing is getting the sway bar endlinks undone without stripping out the allan bolt.

[CH0SiiN1]

Pay bubba to do it, he's pro...lol


As for prokits...doing it yourself in your driveway? Do you have a proper impact wrench and spring compressors and have done it before? If yes, than a couple hours, if not than all day. If you're unsure and want it done fast and right, pay bubba.

I've got time on the weekend if anyone wants to NATOR some stuff though.

ok, lol.. so bubba will u plz do my angels, lmao.. if yes pm me with you cost, thx

[mParsonz]

Home hardware on victoria has a HUGE shelf of plastidip...looks as if no one knows it is there LOL

Sick, ill be stopping there then tonight before I stop at Forbes LOL.

[mParsonz]

Ya so just chillin in the shop about an hour ago by myself.. some lady comes up asks if she can drop off some tires, they're old and she doesn't want them.. Pulls her car in "The tires are on rims thats fine right?" I look at the rims.. they are alloys off a fifth gen. Jetta.. So I asked if she was sure she didn't want the rims "Ya I'm selling the car and the rims suck so I don't want em"

LOL so ya, pretty sweet I just got some free alloys, not in the best shape.. but its just the brushed aluminum face thats not in good shape.. If they were the right bolt pattern I would have just painted that face white and used em LOL

just a random pick found on the internet, of the rims I got lol.
http://i1066.photobucket.com/albums/u401/mparsonz3/jettarim.jpg

[stevenma188]

^? Just rubbing it in?

[mParsonz]

^? Just rubbing it in?

LOL I'm sorry :P Just thought I would share :)

Also, spotted a Blue 1st Gen sedan, lowered on black rims, with a Mazda sticker on the bumper i believe? Seen it around 5:45 pulling into a complex on Courtland. Anyone on here?

[Mitchell3]

Anyone have a jack and stands they might be willing to lend? Im thinking of possibly a plastidip project on my wheels however if i take it on I only have the jack that comes with the car to work with. no way im using that to take off all my wheels one by one.

[mParsonz]

Anyone have a jack and stands they might be willing to lend? Im thinking of possibly a plastidip project on my wheels however if i take it on I only have the jack that comes with the car to work with. no way im using that to take off all my wheels one by one.

I have a 3 ton jack I believe if you want to borrow that.. Could just do the fronts then the backs :P

[turtle]

I've got a couple stands you can use Mitchell, but no jack.

[Mitchell3]

Thanks guys, a jack isnt super important. The jack that comes with the car should work but its quite the work out especially on a hot day.. Ill contact one of you guys when I'm ready and work something out =)

[SupermanRitz]

I actually just did mine with the wheels still on the car. worked out nicely and could see the finished product as I was going

[mParsonz]

Hey has anyone ordered stuff from S.F.W? Just wondering how long it took to ship to Kitchener, I paid her like last Tuesday :P

[turtle]

Hey has anyone ordered stuff from S.F.W? Just wondering how long it took to ship to Kitchener, I paid her like last Tuesday :P

Lol you should get it soon, and Ami is not a lady.

[mParsonz]

Lol you should get it soon, and Ami is not a lady.

:o HE****** Just assumed.. aha my bad!
Alright sick, hopefully it comes tomorrow ;D

[S.F.W.]

:o HE****** Just assumed.. aha my bad!
Alright sick, hopefully it comes tomorrow ;D

Likely won't arrive tomorrow, but likely will arrive by mid next week.
And yes, I am an XY not an XX

[bubba1983]

Thats subjective, pending who you ask. Lol

[mParsonz]

Likely won't arrive tomorrow, but likely will arrive by mid next week.
And yes, I am an XY not an XX

Yeah thought that over and mail doesn't come Saturdays LOL....
And I am honestly so sorry!! I had no idea, I feel terrible :bang

[The Wolf]

Yeah thought that over and mail doesn't come Saturdays LOL....
And I am honestly so sorry!! I had no idea, I feel terrible :bang

hehe, it happens allllll the time..

[mParsonz]

PlastiDipped my emblems today, and I messsed up on "MAZDA" so I was just going to take it off, leave the "3" and the big emblem.. yeah not happening -.-

http://i1066.photobucket.com/albums/u401/mparsonz3/IMG-20120630-00046.jpg

Oh well turned out awesome in the end.
http://i1066.photobucket.com/albums/u401/mparsonz3/FrontEmblemPlastiDip2.jpg
http://i1066.photobucket.com/albums/u401/mparsonz3/IMG-20120630-00049.jpg

[standsideways]

Its strange how the speed3 has no posts but the regular 3's do.

[chris.joh]

Pretty sure I spotted turtle last night on westmount coming off ottawa

[mParsonz]

Its strange how the speed3 has no posts but the regular 3's do.

damn eh.. shoulda gotten a speed ;) haha.
Oh well still looks good

[turtle]

Pretty sure I spotted turtle last night on westmount coming off ottawa

Could very well be, I live off of Westmount, didn't see you tho dude!

[The Wolf]

anyone here going to the big show at sunrise plaza today?

[Mitchell3]

I was out there for work and drove by.

Edit:
Made up my mind:
User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. mParsonz 1 x 2010+ Short Ram Intake 2.0L Standard(blue/black/blue/black) - Axl-6-117-23131 (will confirm at cutoff)

[turtle]

I was out there for work and drove by.

Edit:
Made up my mind:
User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue (maybe, I'm debating on this over the mspeed one)
2. SomeGuy - 1 x H8 LED - Gen-8-H8 (for sure)
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. mParsonz 1 x 2010+ Short Ram Intake 2.0L Standard(blue/black/blue/black) - Axl-6-117-23131 (will confirm at cutoff)

Nice Mitchell! Good choice.

Giving my car to Forbes tomorrow for Power Steering recall and alignment/balancing. Not that I need it.....my car wobbles all over the road, people must think I'm drunk lol.

[SomeGuy]

As it stands we want to place the order monday July 9th...can everyone please confirm and then arrange deposit or payment with me:

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. mParsonz 1 x 2010+ Short Ram Intake 2.0L Standard(blue/black/blue/black) - Axl-6-117-23131 (will confirm at cutoff)

[turtle]

As it stands we want to place the order monday July 9th...can everyone please confirm and then arrange deposit or payment with me:

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. mParsonz 1 x 2010+ Short Ram Intake 2.0L Standard(blue/black/blue/black) - Axl-6-117-23131 (will confirm at cutoff)

PM me your email address and I'll transfer my payment friend.

[SomeGuy]

PM me your email address and I'll transfer my payment friend.

My bank doesn't do EMT. I can do paypal or cash.

[turtle]

No worries, I'll swing by with cash soon.

Unrelated, did you get your horns from G16 yet?

[Reddie1337]

My bank doesn't do EMT. I can do paypal or cash.

What bank are you with that they don't accept Interac Transfer? That seems crazy to me.

[SomeGuy]

What bank are you with that they don't accept Interac Transfer? That seems crazy to me.

It's a smaller one based out of Ottawa that my mom works for...most people haven't heard of them. They are supposed to get EMT soon but nothing yet.


No worries, I'll swing by with cash soon.

Unrelated, did you get your horns from G16 yet?

Nope, hopefully soon. Apparently they were back ordered from sickspeed but they've shipped now to Garage16 which means hopefully out to me shortly.

[turtle]

Nope, hopefully soon. Apparently they were back ordered from sickspeed but they've shipped now to Garage16 which means hopefully out to me shortly.

Hopefully yours come soon, as that means mine will come soon too haha.

[SomeGuy]

Derrick will have discount info for me tomorrow...then we really have to get the order together and finished so I can send it in Monday.

[klspeed3]

I can Paypal you the $$...should I wait for the discount info tomorrow and then just give you the full amount?

[SomeGuy]

I can Paypal you the $$...should I wait for the discount info tomorrow and then just give you the full amount?

Sure, wait for the details so we can have a better idea what it will be. Then I will start collecting deposits for the order.

Also, you're welcome to swing by my place with cash to save the paypal fees if you'd prefer (and buy my OCC while you're at it ;))

[standsideways]

(and buy my OCC while you're at it ;))

Ide take it in a second if i had not just ordered coils

[SomeGuy]

Ide take it in a second if i had not just ordered coils

$180, you can't beat it at that price.

[mParsonz]

User - Quantity x Part Name - Part Number
1. SomeGuy - 1 x OCC - Gen-6-888-blue
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)

Only going to get the LED Kit, going to get some rims instead of cold air :P I can swing by with cash next week, just need to know exactly how much it will be :)

[The Wolf]

Ryan let me know how much I owe for the intake. Don't have BBM anymore so PM me here

[Mr Wilson]

Anyone know the guy with the red Gen II with 'time attack' wheels. Was on Shantz Hill Rd/King just south of the 401 when they drove by?

[S.F.W.]

1. SomeGuy - 1 x OCC - Gen-6-888-blue
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. S.F.W. - 1 x Corksport Led DRL Kit - Gen-8-HN
11. S.F.W. - Corksport foglight kit - Gen-8-H11
12. S.F.W. - Corksport Flexfit Hat - Hat-Cs, Blue Hat/White Stich, S/M

[S.F.W.]

I'm hoping someone will be coming to the GTA, and can meet up with me. Worst case, I'll suck it up and make the drive...

[SomeGuy]

I'm hoping someone will be coming to the GTA, and can meet up with me. Worst case, I'll suck it up and make the drive...

I'm sure we can work something out if need be :) Only reason I posted in the other thread that it was local pickup only is I didn't want the dozens of TO members asking me to make arrangements with them or having to reship almost the entire order back out.

[turtle]

I'm hoping someone will be coming to the GTA, and can meet up with me. Worst case, I'll suck it up and make the drive...

If I'm still going back and forth to Scarborough on weekends when the order comes in I can meet up with you somewhere Ami.

[klspeed3]

.... Don't have BBM anymore so PM me here

:( were you affected by the recent round? or just moved on?

[The Wolf]

:( were you affected by the recent round? or just moved on?

I quit back in December, doing carpentry now. Best move I ever made... Saving me so much stress lol

I wanted to wait for a BB10 device but when I heard they were delayed again, I went android

[klspeed3]

I quit back in December, doing carpentry now. Best move I ever made... Saving me so much stress lol

I wanted to wait for a BB10 device but when I heard they were delayed again, I went android

nice man, I can imagine lol...


and goddamn your car looks shiny in that sig :hawt

[standsideways]

Just saw a gold 1st gen sedan on fairway rd

Lowered,lip kit, tints, etc didnt get a good glance it was behind me in the other lane.

Anyone?

[The Wolf]

nice man, I can imagine lol...


and goddamn your car looks shiny in that sig :hawt

haha thanks man! it's a low-light HDR pic with the new phone!

[mParsonz]

Hey guys, got a couple audio things for sale.. check em out, shoot me an offer :) would be a lot easier to sell the stuff in Kitchener! Click Click :) (http://www.torontomazda3.ca/forum/showthread.php?64586-FS-JBL-amp-Kenwood-deck-MBQuart-speakers!!)

[SomeGuy]

No word from Derrick from CorkSport but I've sent him a message to remind him. As I've told a few of you, hold off on giving me a deposit until we get the details, just so you guys know what the deal will be.

[floodgatez]

1. SomeGuy - 1 x OCC - Gen-6-888-blue
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. S.F.W. - 1 x Corksport Led DRL Kit - Gen-8-HN
11. S.F.W. - Corksport foglight kit - Gen-8-H11
12. S.F.W. - Corksport Flexfit Hat - Hat-Cs, Blue Hat/White Stich, S/M
13. Floodgatez - 1 x Power Series Catback Exhaust System 2nd gen 2.5L (hatch) with Racepipe option (+$80) - Axl-6-119-27

[SomeGuy]

1. SomeGuy - 1 x OCC - Gen-6-888-black
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. SomeGuy - 1 x DISI Silicone Bypass Valve Hose - Axe-6-200-black
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 ( still have to get part number off their website)
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. S.F.W. - 1 x Corksport Led DRL Kit - Gen-8-HN
11. S.F.W. - Corksport foglight kit - Gen-8-H11
12. S.F.W. - Corksport Flexfit Hat - Hat-Cs, Blue Hat/White Stich, S/M
13. Floodgatez - 1 x Power Series Catback Exhaust System 2nd gen 2.5L (hatch) with Racepipe option (+$80) - Axl-6-119-27

[stormin84]

got the part number now

1. SomeGuy - 1 x OCC - Gen-6-888-black
2. SomeGuy - 1 x H8 LED - Gen-8-H8
3. SomeGuy - 1 x DISI Silicone Bypass Valve Hose - Axe-6-200-black
3. Mitchell3 - 1 x Power Series Exhaust 1st gen w/ cat - Axe-6-109-12
4. turtle - 1 x 2004-2009 Mazda 3 Short Ram Intake (Blue Silicone & Filter, Black Clamps) - Axe-6-117-23131
5. klspeed3 - 1 x 2007-2009 Speed3 Stage 2 SRI (blue filter/silicone, black MAF/TIP/clamps) - Axl-6-118-100
6. klspeed3 - 1 x 2007-2009 Mazdaspeed 3 Shifter Bushing Set - Axe-6-958-10
7. sawatsky - 1 x 04-09 Mazda 3 Short Ram Intake (all blue) - axe-6-117-23131
8. stormin84- 1 x led fogs 2007-2009 Ms3 -Gen-8-9006
9. mParsonz - 1 x LED Light Kit 2010-up - Axl-9-011 (for sure buying)
10. S.F.W. - 1 x Corksport Led DRL Kit - Gen-8-HN
11. S.F.W. - Corksport foglight kit - Gen-8-H11
12. S.F.W. - Corksport Flexfit Hat - Hat-Cs, Blue Hat/White Stich, S/M
13. Floodgatez - 1 x Power Series Catback Exhaust System 2nd gen 2.5L (hatch) with Racepipe option (+$80) - Axl-6-119-27

[SomeGuy]

Alright guys, I got the info from Derrick. They are willing to do 10% off and are going to work with me on shipping to get the costs as low as possible. From this I have formulated this spreadsheet to track your actual cost:

http://someforum.net/2012/CorksportGroupBuy.xlsx

Here's a screen cap as it stands right now:
http://someforum.net/2012/CorksportGroupBuy.PNG

************* Please verify your items as I have them listed and ensure all details are correct **************

Currently the shipping actual is just the same as the estimate, this will vary once the stuff comes in and I've gotten the bottom line including customs/brokerage/etc. Some items like the exhausts are too big to ship USPS so it does make it harder to figure it out ahead of time. Like I said, I'll work with them to get you the best shipping cost possible. Each person (as you can see in the formulas) will pay a portion of the actual total shipping based on what the estimate is on Corksports site as of today. I did this per item in the cart individually for those who have more than one item just to ensure consistency.

So with all of that said, I'm ready to go ahead and collect deposits from people. Please see the minimum deposit amount as listed in the spreadsheet. I have figured these amounts to try to be fair to each person but also so I'm not massively out of pocket on this order. I can take deposits via cash, personal cheque or paypal. Your stuff will NOT be ordered if I don't have a deposit, period, no exceptions. Due to the late notice of this though, rather than the monday, we'll do Wednesday July 11th as the cutoff.

Any questions/comments/concerns let me know.

Cheers :)
Ryan

*Edit* I've updated to include 13% HST. I'm not 100% sure when and what this gets applied to. Some stuff that I've shipped USPS hasn't had it from the states, other stuff has. I've erred on the side of caution and included it.

[S.F.W.]

I am taking the hat off my order for sure..$26.80 to ship a hat ? Really ....
Need to think about the LED's...$15.50 to ship each is a lot...

What we need is someone willing to pick the items up in Niagra Falls, NY. We would pay HST, but no duty as items are made in the US. And likely save a boat load on shipping.

[SomeGuy]

I am taking the hat off my order for sure..$26.80 to ship a hat ? Really ....
Need to think about the LED's...$15.50 to ship each is a lot...

What we need is someone willing to pick the items up in Niagra Falls, NY. We would pay HST, but no duty as items are made in the US. And likely save a boat load on shipping.

Ami - I just used their (corksport's) estimator, which from what we all see here, is grossly high. Everyone is welcome (and encouraged) to verify my numbers. The hope is that shipping it as a whole with actual costs will end up cutting that $576 of shipping down to $200-300. Also, brokerage costs above a certain value don't increase by much, so really they'll amount to at worst with UPS about $80.

[S.F.W.]

Oh...I thought that was an actual shipping estimate from CS.
Please don't ship UPS..there is much more than the $80 fee, see this - http://www.ups.com/content/ca/en/shipping/cost/zones/customs_clearance.html
Bond Fees would be $72, plus $50 Duty & tax Fee, etc .
USPS is the way to go...

[SomeGuy]

Oh...I thought that was an actual shipping estimate from CS.
Please don't ship UPS..there is much more than the $80 fee, see this - http://www.ups.com/content/ca/en/shipping/cost/zones/customs_clearance.html
Bond Fees would be $72, plus $50 Duty & tax Fee, etc .
USPS is the way to go...

Derrick said the exhausts can't be shipped USPS. I've got a couple questions out to him about how we can deal with that. Hopefully the majority of the order can be shipped USPS.

And yes, its the estimator not an actual estimated quote from corksport. I will ask Derrick for those numbers if possible (might not happen until they pick/pack the order) and will update everything once I know. In the end though, if the balance means you guys get refunded because actual price was less than deposit, then kick ass :)

Do you want to stay in on the hat for now or want me to take it out?

[S.F.W.]

Derrick said the exhausts can't be shipped USPS. I've got a couple questions out to him about how we can deal with that. Hopefully the majority of the order can be shipped USPS.

And yes, its the estimator not an actual estimated quote from corksport. I will ask Derrick for those numbers if possible (might not happen until they pick/pack the order) and will update everything once I know. In the end though, if the balance means you guys get refunded because actual price was less than deposit, then kick ass :)

Do you want to stay in on the hat for now or want me to take it out?


I'm going to guess Derrick can tuck the hat into one of the larger boxes...they can likely do the same with the LED's myself and others ordered. F'k yeah..keep me in for everything . But let's see what we can do.

Worst case if it makes sense to ship UPS, we can use a customs broker I have used before. We will get charged $50 for the work, and then pay HST on the order.

[CorkSport - Derrick]

Hey guys,

The shipping on the parts will calculate out at a better price. I looked over the spreadsheet there and the shipping cost comes up at ~$286 for the current list.

-Derrick

[SomeGuy]

Guys, in light of this information I've adjusted the spreadsheet and the deposits required to be more in line with what actual shipping will work out to :)
The link in the original post is updated but here's a screen cap:

http://someforum.net/2012/CorksportGroupBuy2.png

[Sappo569]

Hey Derrick...

I wish I had noticed this thread earlier, I just ordered a few things from you guys

Order # 2407035 ... has that been dropped/picked up by USPS yet?

If not is there anyway to tack this into the group buy?

Thanks!

[turtle]

Thanks Steven for the RMM, and thanks Ryan for helping me install it! Productive day. Also exchanged waves with a black GenOne Hatch with TM3 plates. Who you be friend?