PDA

View Full Version : DRL on 05 GT hatch



phoenixrage
11-06-2008, 12:56 PM
how hard would it be to make it like the 07's and have the high beams as the DRL?

I plan on putting HIDs in later. Or can I jsut disable the DRLs altogether? which is also an option.

and if i disable the DRLs or re-wire to the highbeam, would i still need that relay for the HIDs?

Cardinal Fang
11-06-2008, 01:21 PM
I think McGuyver tried or did this. The only issue is that when you DRL's are on your high beam indicator on the gage goes on.

phoenixrage
11-06-2008, 02:13 PM
so i guess the better way would be to disable the DRL altogether. which I dont mind, so thats just pulling the fuse right?

Walrus
11-06-2008, 02:16 PM
Not on an 05 - no fuse for DRL. That appeared on 07s.

phoenixrage
11-06-2008, 04:06 PM
doh!.. so what do i do? LOL

condor888000
11-06-2008, 04:10 PM
You need the DRL bypass harness, basically you draw power from the parking lights instead of from the low beam sockets.

If I were to do it again, I'd do the high beam as DRL mod. I'm thinking about wiring it up over the winter.

phoenixrage
11-07-2008, 11:44 AM
so what do i need to do the high beam as DRL mod?

Jeff-TheBiz
11-07-2008, 12:06 PM
You need to search, this has been well covered and an on going mod for you to have HIDs installed on an 05-

phoenixrage
11-07-2008, 12:20 PM
i'll do a search and revive the thread, but if the mods can maybe sticky stuff like that?

phoenixrage
11-07-2008, 01:20 PM
after much reading and sifting through some drama..

http://www.mazda3forums.com/index.php?topic=86736.0

Walrus
11-07-2008, 01:28 PM
If you looked in the lighting subforum instead of electrical, you would see a stickied thread on DRLs, and another on HIDs.

http://www.torontomazda3.ca/forum/forumdisplay.php?f=98

phoenixrage
11-07-2008, 01:34 PM
yea, i forgot which section I was in.. plus its somewhat electrical too.. and I figure that section was more about LEDs/HIDs etc.