Ballast on Different Size Bulbs

[MikeyGT]

Hi,

I'm not sure if its been posted already as i tried searching with no success=(

I was wondering would it cause any issue to use a Ballast that came with the 9006 on an H7?

Thanks

[yearoftherat]

Should'nt be any issues as long as the ballast is the same wattage.

[MikeyGT]

Should'nt be any issues as long as the ballast is the same wattage.

That's what I thought. I looked through the ballast yesterday and it didn't say what specific bulbs it should be used for.

And yes they're the same wattage. Thanks:)

[skunk2]

if it's an aftermarket ballast, it will have AMP connectors, they're not really bulb specific other than wattage. some aftermarket ballasts have a different type of connector which are bigger than the AMP, not sure what they are called.

[MikeyGT]

Well i'm using Prolumens. Basically my right head light is out. It turns on for a minute than flickers a bit than turns off.

I'm going to swap bulbs to see if its a bulb issue or ballast. Since i have a 9006 ballast, I just wanted to know if i needed to buy one for my head lights which use H7 or reuse my spare ballast for the fog.

But thanks. Seems like there should be no problem :D.