lamin-x meet + decals

[mleblond]

Sorry my post looks like crap coming from my bb
At 12:00 tomorrow
Ok guys I have the laminx on hand now. Meet will be at the shops. On steeles. Basically the exit steeles on 404 and go west. There's a timies and esso I will be parked close to the esso. Look for a black speed

[Soyabean]

IS there any chance you will be at a closer west location?

I'll pm you

[mleblond]

Cell phone 613-583-2133 I'm in niagara right now call me maybe we can do it tonight on my way in

[Soyabean]

Blah, i'll see u around 12 then.

[Malcolm991]

I can't make it, some notice would have been better for me as I have to come from Mississauga!

[Hypothrml]

Can't make it out to the East, let me know if there's another meet this week.

[Darkfrosty7]

installed my tints on my reflectors today,
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs012.snc1/2631_59140910938_500540938_1616552_2269683_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs012.snc1/2631_59140915938_500540938_1616553_1141858_n.jpg

[stormin84]

looks good Darkfrosty7

was it hard to install

[Darkfrosty7]

looks good Darkfrosty7

was it hard to install

not really. i just traced out the reflectors with tracing paper, put it down on the sheet of smoke tint and cut. lol took me only about 30 mins, found out that scissors are a hell of a lot faster than a knife. lol

[mleblond]

I did my tail lights yesterday. It looks sick at night. I will try to post some pictures later today.

Basically as some saw at the meet it looks a bit purple ish. I will call lamin-x today and figure out what the hell that is all about but today it looked less purple than yesterday and may just need to settle before it gets to it's gun smoke color. Either way I will hold off until I can confirm. As i may need to send it back.

[bunchi]

not really. i just traced out the reflectors with tracing paper, put it down on the sheet of smoke tint and cut. lol took me only about 30 mins, found out that scissors are a hell of a lot faster than a knife. lol


was that a regular tint for windows?

[mleblond]

was that a regular tint for windows?

Dude, it's the lamin-x stuff.

[bunchi]

Dude, it's the lamin-x stuff.

lol yeah I thought so :chuckle thanks

[Soyabean]

Hope they get it fixed for you Matt. Hoping to see the pics of your tails soon

[mleblond]

full back shot with the sun
http://s151.photobucket.com/albums/s147/mleblond/?action=view&current=fullbacksun.jpg

back in the shade
http://i151.photobucket.com/albums/s147/mleblond/shade.jpg

close up in sun
http://i151.photobucket.com/albums/s147/mleblond/sun.jpg

[Gizzmo_jr]

I was gonna say that's totally murdered out until I saw the purple version, ewww.

[Thrizzl3]

nice! now all mat needs is to tint his windows for the "blacked out" look:chuckle

[stormin84]

Mathieu did you every figure out why they are purple....

[mleblond]

no reply yet....will keep you all posted

[Dave_The_BMXER]

ahh looked good until purple.

[theurgy]

Well I would only be doing my reflectors.. but let me know.

[mleblond]

http://i151.photobucket.com/albums/s147/mleblond/IMG00077-20090326-0854.jpg

You guys think it's getting better?

[evik]

got a little better... but still... purple! :S

[Soyabean]

Still a little purple Matt. Try having direct sunlight shine into it. It will show the purple more. Im sure lamin-x has a defective roll. There is no way the charcoal looks like this

[stormin84]

So Mathieu has the colour changed yet or found out why the roll is purple

[mleblond]

got a little better... but still... purple! :S

This sums it up pretty good.


So Mathieu has the colour changed yet or found out why the roll is purple

It did get a bit better and the best quote for it is: "Good from far but far from good!"

I am shipping the roll back to get a replacement.

Will keep you guys posted....I might buy a yellow roll for fogs.

[JamesDL]

i would be in for a little yellow

[Gizzmo_jr]

Yellow fogs please !!!

[mleblond]

yep will order a roll of yellow this week. I got swamped by pm/email/bb mesenger lol

[Soyabean]

Hows the issue coming along Matt? Are they going to fix the charcoal problem?

[ZeroChalk]

i'd be interested in getting some lamin-x charcoal for my reflectors.

[mleblond]

Yep, sending the roll today and will get a new one in the mail. Also ordered a roll of yellow. :) I guess give it another 1-2 weeks and everything should be cleared out :)

[Soyabean]

perfect. Lets hope everything works out. Im really anxious to black out my tails

[mleblond]

i'd be interested in getting some lamin-x charcoal for my reflectors.

I can sell you black reflective vinyl if you want instead? But for lamin-x you will have to wait a bit.

[stormin84]

Hey Mathieu i may change my order a bit when you get the yellow roll in.

[mleblond]

no problem, I will receive both at the same time.

[cwp_sedan]

+1 for yellow!!

[JamesDL]

I can sell you black reflective vinyl if you want instead? But for lamin-x you will have to wait a bit.

these are the pre cuts? whats the price on these? PM me if you like

[mleblond]

after almost 2 weeks....
http://i151.photobucket.com/albums/s147/mleblond/IMG00141-20090331-1849.jpg

http://i151.photobucket.com/albums/s147/mleblond/IMG00140-20090331-1849.jpg

[stormin84]

yup still purple, glad you are getting a new roll, there had to be something wrong with the roll...

[Whosit]

I would like to buy enough to do my tail lights and fog lights.... Will you ship to Ottawa?

[JamesDL]

I would like to buy enough to do my tail lights and fog lights.... Will you ship to Ottawa?

Can get ours shipped together maybe and maybe Mike depending on what he does

[Whosit]

Can get ours shipped together maybe and maybe Mike depending on what he does

I am good with that.

[theurgy]

Oh I'm just waiting for a response back from Mathieu about EMT transfer of the cash...
Unless James.. have you paid already?
If not.. I can throw you cash and just tack it onto your PayPal?

[mleblond]

hey guys, I sent the roll back and could be 2 weeks before I see anything back my way. I will keep you posted. And once it's resolved i will come visit Ottawa for you all :)

[Whosit]

hey guys, I sent the roll back and could be 2 weeks before I see anything back my way. I will keep you posted. And once it's resolved i will come visit Ottawa for you all :)

Perfect! Can you add me in for enough for the tails and fogs?

[Hives]

It looks hype. I always thought the red Speed3 in ur signature was yours lolll

[theurgy]

Hey,

Any word on Lamin-X... hehe I'm getting annoyed at looking at my rear reflectors now..
Lemme know.

[mleblond]

Hey,

Any word on Lamin-X... hehe I'm getting annoyed at looking at my rear reflectors now..
Lemme know.
they sent me samples of the other colors as I didnt want another purple gunsmoke. I will update when I get them. I should expect the rolls in a week :)

[Soyabean]

Can u get charcoal and is that the darkest? I believe thats the darkest tint is charcoal but on the site gun smoked looks dark too.

[Soyabean]

Any updates? Im just waiting on blacking out my tail lights and my summer look is done

[mleblond]

Got my tracking number today. Got yellow and light tint coming in. Price TBD.

[Soyabean]

Got my tracking number today. Got yellow and light tint coming in. Price TBD.

Whats the light tint? Can u get any charcoal or darker colours?

[mleblond]

the light tint is so I can do the front and back headlights. I can get charcoal but I don't have enough demand for it.

[Soyabean]

Light tint is the gun smoke?

[kLuMzi]

you'll still have the gun smoke, right?

[mleblond]

no gunsmoke is the purple tints, light tint is lighter than gunsmoke

[Soyabean]

OO, its the Tint colour on the lamin-x site

[mleblond]

Thats the one. 7% tint if my memory is good.

[mazdathree]

Are we going to get them pre-cut for the fogs?

[mleblond]

yep, I will cut them myself for you all

[mazdathree]

sweet! :bana2

[Soyabean]

Its almost here right. I wonder if the tint film will be enough to make the chrome from the OEM led tail lights less visible

[mleblond]

tracking says it should be in today :) I don't think ill get much sleep if it is lol