Looking for Turbosmart DualPort BOV Recirc Plate

[Fobio]

I just grabbed a Turbosmart DP BOV from stormin84...I thought it comes with the recirc plate, but it does not. Anyone know where I can find one online? locally? anyone has one laying around collecting dust?

[RX9]

it does come with the plate!

[Fobio]

that's what I thought...but I know that some don't, as they were sold as BOV, not BPV...

[kid_icarus]

that's what I thought...but I know that some don't, as they were sold as BOV, not BPV...

+1
when i bought mine from rezxpert it did not come with the recirc option or stopper or whatever u wanna call it.

[stormin84]

Hey Fobio, when i first bought it, i noticed that there was no plate to block it off, asked a supplier and he checked into it and said that they don't come with one. RX9 says that it does other members say it doesn't. i guess the only true answer is to email streetunit to see if it does.

[CanadaGTO]

From what I've seen, the Compact Dual Port comes with the adaptor, the original StreetUnit Dual Port does not.

[Fobio]

Hey Fobio, when i first bought it, i noticed that there was no plate to block it off, asked a supplier and he checked into it and said that they don't come with one. RX9 says that it does other members say it doesn't. i guess the only true answer is to email streetunit to see if it does.


From what I've seen, the Compact Dual Port comes with the adaptor, the original StreetUnit Dual Port does not.

thanks guys! I'm looking into sourcing it from elsewhere...any suggestions Pat? I emailed Turbosmart and they directed me to a dealer in Montreal...looking @ ~$45 shipped. Yikes! :loco

it's a simple plate...less material than even the Cobb shifter weight...lol..and it costs more...go figure...any machinist in here?

[CanadaGTO]

thanks guys! I'm looking into sourcing it from elsewhere...any suggestions Pat? I emailed Turbosmart and they directed me to a dealer in Montreal...looking @ ~$45 shipped. Yikes! :loco

it's a simple plate...less material than even the Cobb shifter weight...lol..and it costs more...go figure...any machinist in here?

If you have the part #, PM it to me and I'll see what I can do.

[Zspeed]

Why dont you just run the valve 50/50?

[Fobio]

If you have the part #, PM it to me and I'll see what I can do.

Thanks for trying Pat!


Why dont you just run the valve 50/50?

I want options...I have a feeling with what I'm about to do to the car, I want to keep things as safe as possible.

[yellowmp5]

i have the plate if you want to take some dimensions~
but i'm plannin' on keepin' the plate for myself tho~

[Fobio]

i have the plate if you want to take some dimensions~
but i'm plannin' on keepin' the plate for myself tho~

sent you PM...appreciate it!

[yellowmp5]

O/A dimension 44mm (39.5mm tapered) x 34mm x 6mm thick
holes dimensions 34mm x 29mm (x 44.5 cross dimensions) 3mmØ hole


Front
http://img179.imageshack.us/img179/8563/dsc01243.jpg

Back
http://img12.imageshack.us/img12/2596/dsc01244l.jpg

Side
http://img17.imageshack.us/img17/6186/dsc01246j.jpg

O/A dimensions
http://img19.imageshack.us/img19/5776/dsc01233x.jpg

http://img26.imageshack.us/img26/9682/dsc01237n.jpg

http://img19.imageshack.us/img19/3039/dsc01242xtx.jpg


Holes dimensions
http://img25.imageshack.us/img25/4144/dsc01238s.jpg

http://img294.imageshack.us/img294/1595/dsc01239v.jpg

http://img24.imageshack.us/img24/6978/dsc01241w.jpg

[Fobio]

thank you so very very much! =)