Need some help...

[Donutz]

My secondary o2 sensor is shot. I bought a replacement, but due to the fact that I have a header I need to lengthen the wires. I'd like to do this before I get to Jimmy's so the install goes a little quicker. Does anyone know the length of the wires in the Vibrant o2 sensor relocation kit? I have my secondary sensor installed just behind the secondary cat.

[Fobio]

Jason, would this help?

http://www.torontomazda3.ca/forum/showthread.php?t=27719

Mazda specific:

http://www.casperselectronics.com/store2/index.php?cPath=21&osCsid=d840b2581d517a338a7e75c884f78934

[Donutz]

Not exactly but it gives me an idea. I bought an o2 sensor with a 31 inch wire, so I think I'll extend it to 4 1/2 feet just to be safe. Thanks for the links!

EDIT** Actually, I think I'll order one of those extention wires. I don't mind doing the soldering, but that looks so much easier!

[Donutz]

I ended up soldering in about 3 ft of extra wire. It turns out that I couldn't get the cable shipped before my appt with Jimmy, and I couldn't stand the CEL's anymore! And, I have mad soldering skills from back in the day!