PDA

View Full Version : alignment kit, will it work?



gibbons3
12-03-2009, 10:23 PM
sorry if this has been asked before but i came across this for the ford focus, will it work for our car? i know the ford focus eibach camber kit is the exact same thing as the one for our cars so im thinking it will?

thanks in advance

http://www.sfxperformance.com/parts/EIB581310K.htm

Donutz
12-03-2009, 10:25 PM
There are camber kits specifically for our cars. Eibach, SPC, Megan, etc.

gibbons3
12-03-2009, 10:35 PM
ya i know, its just that its only like $35 and im putting in prokit springs so im thinking the alignment will not be off by much more than 1 degree

Hives
12-03-2009, 10:39 PM
you do not need a camber kit with the pro-kit.

Thrizzl3
12-03-2009, 10:39 PM
if you go lower than 1.5 then a camber kit will be necessary. since prokits only drop 1.2 you probably wont need a camber kit. an alignment maybe after two weeks of driving.

Donutz
12-03-2009, 10:43 PM
^^ What they said. I would suggest getting the prokits installed, then going for an alignment. The results will dictate if you need a camber kit.

Hives
12-03-2009, 10:59 PM
My drop came out to be around 1.4 -1.5 (on Apex Springs) and I don't have a camber kit and my tire wear is fine.

condor888000
12-03-2009, 10:59 PM
Those bolts will not fit, the 3 does not have anywhere for them to go. Buy a proper kit.

gibbons3
12-03-2009, 11:06 PM
alright thanks everyone, ill get an alignment after i put the prokit in then take it from there,