Plate Move

[Pokey]

So having the car a couple of weeks now, I saw the ad for the Rhoplate and thought HMMM

I can do this. The original holes have been plugged by (almost) colour matching plugs. I'll post a pic of the plugs later.

http://img339.imageshack.us/img339/1095/img1991f.th.jpg (http://img339.imageshack.us/i/img1991f.jpg/)

Opinions?

[kjmckenz]

*waiting for pics*

[stevenma188]

Did you use the stock plate holder? hard to tell from the pic.

[Pokey]

I actually used a custom ground M16 hex head bolt along with a custom cut/formed/drilled plate holder. It held together nicely but my wife refused to get in the car with the license plate moved so I had to remove it :(

I would make rev2 a little differently than this one, but I figured that for the cost it was worth a try.

[Pokey]

*waiting for pics*

http://img228.imageshack.us/img228/8851/img1992e.th.jpg (http://img228.imageshack.us/i/img1992e.jpg/)

That's the holes remaining (used black plugs with a matte finish) If you look for them of course they're visible, if you're just walking by in a parking lot, not so much.

http://img704.imageshack.us/img704/7479/img1990r.th.jpg (http://img704.imageshack.us/i/img1990r.jpg/)


Another angle.