looking for an engine mount

[Zuluwun]

anyone know where I can get a CPe mount? Do any of the sponsors carry them? Or do I have to order it from somewhere online?

[stevenma188]

Nextmod.

[Zuluwun]

I thought so... I just asked cuz I didn't see it on their site.

[stevenma188]

I think he's about to do a TRZ order. Are you set on CPe?

[Zuluwun]

more or less. def staying away from SU, and the vibes off the AWR sound a little much for what I'm looking for. so ideally, I'm thinkin a 60 duro CPe.

[stevenma188]

To be honest I have the AWR and vibes aren't bad at all unless you turn on the AC.

[stevenma188]

BTW man, I suggest your first mod be a short shift. Makes the feel of the car so much better. Garage16 has them for really cheap.

[Zuluwun]

well the side mount (the one on the passenger side that you can see clearly from the top) looks like it's shot; dried black drip marks under it. so I'll get the dealer to replace it with a CPe rather than with a stock mount since they have to replace it anyways. If I can afford the CPe, I'd prefer it over the AWR.

and when I learn to shift properly, I'll look into the SS.

[stevenma188]

Ah I thought u were getting a rear mount.

[Zuluwun]

I might end up doing that too. If the side mount died, I feel like the rear mount must be gone. do you have to get under the car to see the rear one?

[stevenma188]

Ya, the rear one is underneath the car.

[Zuluwun]

dammit. these mounts are the only problem I have with this car.. did you install your AWR yourself?

[stevenma188]

I was planning on installing the AWR myself, but I just got a guy to do it while he was installing my exhaust. Took like 5 min on the lift to do.

[Zuluwun]

nice. it doesn't seem like too difficult of an install. plus I'm sure I saw a couple how to's around the boards

(it's great how the only person I know at TM3, is the only one replying here lmao)

[Donutz]

Last time I checked the CPE PMM was still in development. If you are looking for a PMM your options are limited. AWR, Street Unit, Top Speed, OEM, and Medieval used to make one (although I think theirs was made out of hardened horse sh!t). That's all I can think of.

[Zuluwun]

it's funny, I literally just figured out that cp-e only makes a RMM... I def need to replace the PMM though, preferring better NVH over performance. what do you suggest for a PMM, Jason?

[Zuluwun]

nvm, there I go posting before searching. I'll get the hang of it, lol. decided on oem PMM, cp-e RMM. thanks for the input though