08 sedan cambers in a 06 hatch Yes or No for fitment

[zakman]

Just wondering if a set of cambers from an 08 sedan will fit in an 06 hatch? i see no reason as to why they wouldnt but please help me out thanks.

all i have found so far is this

FOCUS/MAZDA3 REAR UPPER ARM
Installation Time: .5 hr/side
Req.: 1 per wheel
Applications
Ford: 2000 & Up Focus
Mazda: 2004 & Up Mazda3, 2006 & Up Mazda5
Volvo: 2004 & Up S40, 2004 & Up V50
67440

[cwp_sedan]

04-09 are the same.

The only thing that really changed from 04-06 and 07-09 was how the sway bar bolts up suspension wise. The camber kit should be ok.

[zakman]

perfect thank you. makes that nice and easy

[McGuyver_3]

the camber arms from 04-09 will also fit the 2010's I had this on my sedan. Although however the way you have to replace them on a 2010 is MUCH more complicated then previous years from what I have read. According to an online mannual their are 2 torx screws that lock something in place to move the filler neck on previous gens to avoid pulling down the rear subframe which makes installation relatively easy. On a 10 however those torx bolts do not exist and you MUST pull down the rear sub frame. It was a HUGE pita.