Gar-Lei's Log (First Time)

[gar_lei]

Hello

here's my log, it's the first time i do this please let me know if i did sth wrong.
I'm on Cobb Stage 1+SF+TIH 91


Thanks in advance!

http://img535.imageshack.us/img535/5386/logv.jpg (http://imageshack.us/photo/my-images/535/logv.jpg/)

[BlueStreak]

A good first start. You'll have to switch up the parameters to get a better look at what is going on.

Log the following:
- RPM
- Throttle Position
- Calculated Load
- Mass Airflow
- Mass Airflow Volts (MAF Volts)
- Actual AFR
- DI Fuel Pressure
- Boost
- Spark Advance
- Knock Retard
- Wastegate Duty Cycle

When doing the datalog, start at 2500RPMs and floor the throttle up until 6750RPM.

When you're done, post up the results.:)

[Fobio]

I'd add Long Term Fuel Trim/LTFT.

[gar_lei]

Let's try again, 3rd gear pull.

Thanks

6527

[fywdyl]

Did you turn your DSC off? Your AFRs got into the 9s.

Other than that, looks pretty good.

[gar_lei]

Nah stupid me forgot to turn that thing off... I'll do another log tonight.
Ya I c that it goes to the 9s sometimes it goes to high 8s too...

[SKYMP3]

When doing the datalog, start at 2500RPMs and floor the throttle up until 6750RPM.




Not sure how you guys doing this or I just don't have the balls for it.....but by doing that, it is certainly going 50km over and I worry that I will get home with a taxi or by foot in case anything happened. cough cough

[Fack_Dude]

Not sure how you guys doing this or I just don't have the balls for it.....but by doing that, it is certainly going 50km over and I worry that I will get home with a taxi or by foot in case anything happened. cough cough

Sell your ap and keep it stock. cough cough

[Fack_Dude]

Sell your ap and keep it stock. cough cough

Try doing a 4th gear wot pull with a 400hp mazda and tell me how you really feel......lol

[gar_lei]

hahaha
in QC they dun tow our car even we go over 50km~

But i did it early in the morning tho

[SKYMP3]

hahaha
in QC they dun tow our car even we go over 50km~

But i did it early in the morning tho

I know, one good thing about QC after SAAQ doesnt require the front license plate.
Planning my next trip to QC. :)

[gar_lei]

yup and these r the only 2 good thing abt it....

[gar_lei]

out of curiosity, would I need to calibrate my MAF?

[BlueStreak]

Yes. Always when coming from an OTS map.

[gar_lei]

Yes. Always when coming from an OTS map.

Alright thx i'll try to have it done.
Anything abnormal that's reflecting on my logs?

[BlueStreak]

Your AFRs are super super rich.

What does your OTS command as AFRs under WOT?

[BlueStreak]

Also, come to think of it. This log was done when you threw the CEL no? If yes, take another log as this one is no good.

[gar_lei]

Your AFRs are super super rich.

What does your OTS command as AFRs under WOT?

Hmm I gotta read the Cobb release note. I'll check it out and get back to ya.

[gar_lei]

The graph looks like it stays close to 11 AFR

http://www.cobbtuning.com/v/accessport/maps/mazda/mazdaspeed3/Map_Notes/v210/MAZ_US_MS3_BASE_07_12.pdf

[gar_lei]

Also, come to think of it. This log was done when you threw the CEL no? If yes, take another log as this one is no good.

This log is done right after I fixed the CEL. Maybe I should run a few more KM and log again?

[breakfasteatre]

obviously you dont do a log if there is even the slightest chance of a copper hiding out somewhere.

and as soon as you hit redline, you stomp the brakes

[gar_lei]

obviously you dont do a log if there is even the slightest chance of a copper hiding out somewhere.

and as soon as you hit redline, you stomp the brakes

Ya I'll do another log this week.

I hit the brakes cuz my radar rang~ lol

[gar_lei]

Hello

Have been running OTS Stage 2 SF+TIH.

Did a 3rd gear to end of 4th gear pull.

Please feel free to comment

7638

[SKYMP3]

You haven't floor it to the max....the highest RPM there is like 6100 ish......but the Fuel pressure looks holding up at 1700s...which is good.
Did you get the HPFP? mine hold at 1800s....

[Thrizzl3]

add accelerator position so you know the pedal was all the way down. Why not just do a 4th gear log from 2500-redline?

[fywdyl]

add accelerator position so you know the pedal was all the way down. Why not just do a 4th gear log from 2500-redline?

He's got Throttle Position in there... not exactly the same thing, but it'll tell you if it's WOT or not.

Looks fine to me, nothing out of the ordinary for an OTS map. You could prob take out DI Fuel Press. Voltage (V) and add other stuff to it (BAT, IAT, etc).

[gar_lei]

Thanks for the replieds.

I have Autotech internals installed since last year.
it has always been withint 1700-1800 range.

I'll modify the display parameters and do 2 seperate logs for 3rd and 4th.

THANKS!