Quick question about BC Racing BR Basic vs. EDP

[jonnL]

What are the spring lengths/rates for the basic vs EDP?

I couldn't find it anywhere

[Dave_The_BMXER]

It's not really easily available information. The old stock BC springs were 180mm 7k (I think) the edp is 170mm 10k.

There is also a 135mm 10k available on request.

The rear rates are generally unchanged but the shortest rear is 180mm 6k, and they normally ship with 180mm 7k.

[jonnL]

I'm asking this cause the set I got was front 170mm 7k rear 190mm 4k

[Dave_The_BMXER]

Sorry I mean 170 7k front, not 170 10k.

[jonnL]

The rear rates are generally unchanged but the shortest rear is 180mm 6k, and they normally ship with 180mm 7k.

Do the rears on mine seem to be odd? 190mm 4k... So is mine EDP or just the basic :S

[The Wolf]

Contact BC for new springs. Pretty sure it's free

[Dave_The_BMXER]

^ No its 100 a pair.

Your rears are the same I have currently afaik. I never got new springs for the rear.

[jonnL]

Just making sure cause I don't really want a raked look. Just lowssss

[Dave_The_BMXER]

Lots of people just run the spring.

[mclarke]

So BC Racing what are the spring rates? It goes height, thickens, ID so what is it?

[jonnL]

"The spring rates for the EDP kit (which are default now regardless of order) is 170-7k with 190mm 4k." - Tech@BCRacing

I'm having trouble setting the height of the coilovers, seems to have a lot of reverse rake...

Also, any tips on how to adjust the coilovers evenly? I've measured with a vernier but it seems that one side is always 1/4" too high or so...