CEL-P0192 Car Flat bedded to dealer

[Kris"Speed3"CWP]

FUel Rail pressure sensor low imput which relate to no signal for HPFP which equals 0psi fuel pressure! anybody else see this code before? Replaced fuel rail as sensor and rail are one piece and four new high pressure injector seals and gaskets etc.. Warranty. :bang:bang

[CelestSpeed3]

Maybe this was the cause of all your issues ?

[kickz]

ya common problem fuel pump
it is a very pricey repair

[MPS]

just did mine about 8 weeks ago
the dealer wont sell you just the sensor only full rail $500
i got a sensor for free from scrap yard and it took 2 min to install
i can lend you mine since im not driving the car but you need to get me one back with in 2 weeks

[Kris"Speed3"CWP]

just did mine about 8 weeks ago
the dealer wont sell you just the sensor only full rail $500
i got a sensor for free from scrap yard and it took 2 min to install
i can lend you mine since im not driving the car but you need to get me one back with in 2 weeks

LMAO so funny the dealer says you cannot just buy the sensor but yet you can uninstall and install one no problem!! What scammers the dealer is all the labor to take of the intake manifold inter-cooler new gaskets and injector seals, removing fuel line from HPFP!!! All for what?? The sensor is on the passenger side of the fuel rail and is in plain view when you open hood, unplug, unscrew with socket and install new one once you unplug fuses and relieve fuel pressure!! What Donkey's for real smarten up MCI!!

Thanks for the offer but I still have warranty and I even got a rental car for 3days to boot all for a sensor that can really be replaced on its own!! ROFL and they waste ppl's time on warranty denial to pay for B.S repairs like this?? WOW!!

I guess you proved the integrity of the fuel rail is not compromised if you remove and replace the sensor!