Ambient Temp Sensor harness wires

[littlefield]

I just bought my first Mazda 3 2006 Hatchback GT and noticed that the LCD did not display the ambiant air temp. When I went to inspect the sensor I found that the wires were torn out of the harness and the connector was cracked. I want to re wire it but I dont know what wires connect where. If any one can tell me what wires go to the sensor it would help me out, or even be able to take a picture for me.

Thanks
Brad

[TheMAN]

the sensor mounts in front of the radiator.... right behind the middle of the bumper

[littlefield]

I know where it is I just need to know which wires go to the senesor. I found 4 wires that were broken off the connector and sensor was broken as well.

[littlefield]

Does anyone know what color the wires are going to the ambiant air temp sensor?

[Shawn]

Looks like Brown/Yellow and White/Black

http://i58.photobucket.com/albums/g261/NickDandy/AmbTemp.jpg

Goes to the back of the radio connecter 1P and 1N

[littlefield]

Thanks so much for that info. I have been searching online for a few days and found nothing.

[littlefield]

Installed old ambiant temp sensor I found on the car with the wire daigram you gave me and worked like a charm.
Thanks again
Brad