PDA

View Full Version : Gen2 - 2010 Mazda 3 Headlight Condensation



GSXi
11-01-2012, 03:07 PM
Currently trying to get this resolved :(

Dealership isn't too responsive, but will keep pushing!

Is this a 2010 problem? Google not returning much result on newer years.


https://www.youtube.com/watch?v=dV0QAJeIg1U

mathew.poulos
11-01-2012, 03:12 PM
Currently trying to get this resolved :(

Dealership isn't too responsive, but will keep pushing!

Is this a 2010 problem? Google not returning much result on newer years.


https://www.youtube.com/watch?v=dV0QAJeIg1U


Father has a 2006 RX-8 and had the same issue with the rear lights.
It is an issue in the seal. They need to remove the head light, wipe it down and re-seal it properly. If I remember correct it ended up being a recall for the RX-8's

Hyperion
11-01-2012, 04:38 PM
Warranty my friend.

The Wolf
11-01-2012, 04:40 PM
Try a different dealership or call Mazda Canada. This is a known issue that should be remedied under warranty.

chan7
11-01-2012, 04:48 PM
+1 to everyone above, should be covered under warranty! Have you changed any of the lighting recently?

Jackal
11-01-2012, 09:03 PM
That's pretty obvious that there's way too much condensation and that should be covered. Some dealerships still have a lot of these headlights in stock. Try asking another one.
Had mine replaced for frosting.

Derek13
03-02-2013, 09:59 AM
Just had mine war rented. They lasted 2 1/2 years. I put LED DRLs in them to prevent future problems.

fuhreakz
07-25-2013, 07:53 PM
I get that in my passenger side headlight as well. Went to 2 different dealerships, they say its condensation and its "normal". Funny thing is it only started happening after they replaced the originals when the DRLs were frosting them.

GSXi
07-25-2013, 08:57 PM
I get that in my passenger side headlight as well. Went to 2 different dealerships, they say its condensation and its "normal". Funny thing is it only started happening after they replaced the originals when the DRLs were frosting them.

it's not normal.

after pushing a few times, my dealership replaced it.

kenghk
07-25-2013, 11:25 PM
Got mine done at Keiswetter, no questions asked and mine weren't even that bad. It's a known issue.

HavocSteve
08-02-2013, 06:24 PM
I have the same issue appearing on my 2010 MS3. Same spot except mine has turned white, maybe it got pretty bad and just noticed it since I also noticed my headlights don't appear to light up the road as far as they once did. It seems like I might have 10-15ft of good light and on dark streets where the street light isn't to well I sometimes feel the need to put my high beams on to light up the road further ahead. Next service, I'll be asking my adviser to look into it as this is a safety matter to me now.

Rogreborn
10-15-2014, 02:40 PM
Noticed it mine today. Looks like im taking some headlights apart this weekend.

Canadianbacon
10-15-2014, 03:24 PM
Noticed it mine today. Looks like im taking some headlights apart this weekend.
dealership does it for free

Hyperion
10-15-2014, 06:59 PM
Noticed it mine today. Looks like im taking some headlights apart this weekend.
Get a dealership to warranty it. It's not condensation , its a fine powdered (if you have the 2nd gen tech package
http://tapatalk.imageshack.com/v2/14/10/15/83f634d7bfb55b15989a8b5a0e20ccf0.jpghttp://tapatalk.imageshack.com/v2/14/10/15/a55f3d676ad62b57ade3cb8972adaecc.jpghttp://tapatalk.imageshack.com/v2/14/10/15/c4318cab7655fcfa05914b4b21d8b486.jpghttp://tapatalk.imageshack.com/v2/14/10/15/8bbcc4ed78edb5d18e944ad44710057c.jpghttp://tapatalk.imageshack.com/v2/14/10/15/2d938766fe4f6073cf852a76e4931f62.jpg

Girds
10-15-2014, 10:26 PM
Noticed it mine today. Looks like im taking some headlights apart this weekend.

Kieswatter is a good dealership to deal with that stuff and they are local

Rogreborn
10-16-2014, 07:45 PM
hmm ill check them out.