Koni yellow Recommended Setting for comfort and ride qulity with gen2 prokits.

[Astig02]

Hey guys, a bit of info first.
Car is gen2 NA 5dr GT. Currently sitting on OEM struts and lowered with gen2 prokits.
I expected the ride to be harsh when i lowered the car with OEM Struts.
So now, i am looking in getting KOni yellow and wondering what would be a best setting for them to improve ride quality (comfort) without sacrificing handling.
And if i get Gen1 Konis (used), will there be any fitment issue?
Please chime in specially if you have ran or running the same set up! thanks!

[07carbon3]

http://www.torontomazda3.ca/forum/showthread.php?52857-Damper-settings-on-Koni-Sport-%28Yellows%29&highlight=koni+settings
http://www.torontomazda3.ca/forum/showthread.php?42024-Koni-Yellow-damper-settings&highlight=koni+settings
http://www.torontomazda3.ca/forum/showthread.php?45743-Koni-Sport-Yellow-s-settings&highlight=koni+settings

[Jackal]

Gen2 prokits with gen2 koni yellows I'd recommend 50-60%. Just right based on many on this forum for dd. I have this setup and they are set at 60% stiff. Oh yeah, I got them from Alphamotorsports.

Gen2 prokits with gen1 koni yellows you will need longer bolts which can be purchased from a Mazda Parts department.
http://www.torontomazda3.ca/forum/showthread.php?44797-Koni-Yellow-shocks-require-longer-bolts&highlight=koni+yellow