Remove halo (glued with urethane)

[Simon99]

So I might have an issue. I used urethane to glue my angel eyes the first time to make sure they wouldn't fall, but now I need to change them from the first headlight I installed them in because I broke it. Long story short, now I don't know how to remove that crazy holding black paste known as urethane. Checked google and couldn't find anything that wouldn't damage my LED halo .. Any help is appreciated. Thanks !

[Rob23]

Are you sure you don't need to just change the ballast?

EDIT: Sorry I just realized you said you broke the angel eye.

[Simon99]

Are you sure you don't need to just change the ballast?

EDIT: Sorry I just realized you said you broke the angel eye.

No i broke the chrome part to which the angel eyes are glued to. I want to remove the angel eye from the chrome part without breaking the 200$ led angel

[Pokaroo Kris]

Lacquer thinner, paint remover, silicone wash...

[McGuyver_3]

You can use an exacto knife with a very skilled and patient hand. This will work

[Simon99]

You can use an exacto knife with a very skilled and patient hand. This will work

I have the patient hand part :) I'll try that