PDA

View Full Version : Adjustable End links: any suggestions


Proudfoot
04-12-2013, 07:41 PM
So, I just upgraded my Rear Sway from OEM but now I am curious about adding some adjustable End Links for the bar. Do any of the members have some suggestions?
Thanks and enjoy your weekend.

Marc
Kiyomi
04-12-2013, 07:47 PM
corksport just came out with some for the 3. the stock ones usually last quite a while as well if your worried about them.
Proudfoot
04-12-2013, 08:59 PM
corksport just came out with some for the 3. the stock ones usually last quite a while as well if your worried about them.

Thanks.

Do you think I would be able to adjust the OEM ones to stick them in the more stiff setting of my RSB without having to loosen the RSB, which requires some elbow grease :bang. I mean, I could loosen those bolts, but if I can just play with the end links, it would make things easier... I think.:chuckle
Kiyomi
04-12-2013, 09:23 PM
Thanks.

Do you think I would be able to adjust the OEM ones to stick them in the more stiff setting of my RSB without having to loosen the RSB, which requires some elbow grease :bang. I mean, I could loosen those bolts, but if I can just play with the end links, it would make things easier... I think.:chuckle

you could, but depending on the brand of bar you got, the middle setting is usually the one which is best. I heard that the middle setting on the corksport is already 2xtimes or more as stiff as the oem. the oem ones you can, but you gotta use more "elbow grease". plus, they will wear out faster.
CelestSpeed3
04-12-2013, 10:40 PM
Just use a grinder and notch the spring arm.

Also adjustable endlinks are only needed or corner balancing to remove any preload off of the swaybars. If you are not corner balancing I would just use fixed endlinks.
TheMAN
04-12-2013, 10:54 PM
racing beat or autoexe
Proudfoot
04-12-2013, 11:19 PM
you could, but depending on the brand of bar you got, the middle setting is usually the one which is best. I heard that the middle setting on the corksport is already 2xtimes or more as stiff as the oem. the oem ones you can, but you gotta use more "elbow grease". plus, they will wear out faster.

It is the 22mm Progress one. There are only 2 settings: soft and stiff