Need help with installing OEM HIDS in non OEM Mazda 3 GT

[Elite2k]

Firstly here is my story I have a 2004 mazda 3 GT non OEM HID some lady hit my car so i needed new lights and i found some on kijiji i got lights from a 2007 mazda 3 STOCK OEM HID I just want to know what wires are needed to get this setup to work

from reading posts online I ve gathered that I need a Hid balast harness cable of somekind

here is something i found on ebay.. let me know if this is all that i need

or even if its possible to make one of these connectors that would be great

http://www.ebay.ca/itm/OEM-Acura-Mazda-Honda-Xenon-HID-Igniter-Inverter-Control-Unit-Ballast-Module-/110847606493?pt=Motors_Car_Truck_Parts_Accessories&hash=item19cf083edd&vxp=mtr&_uhb=1

thanks for all the help

Mazdaz Rock

P.S. Ill do a complete write up on install once i figure out how to do this.. :)

[Default User]

I don't think the headlights will fit an 04.
At least they won't go in without modifications.

[Elite2k]

I haven't taken the old ones out yet but i am sure i can make them fit in some how.. i just need to know what the ballast cables are compatible for this

[omalak]

I'm in the process of finishing my conversion to oem xenons.

but i have a 2008. This thread should help,

http://www.torontomazda3.ca/forum/showthread.php?63363-Gen-1-Mazda3-GS-Conversion-to-Factory-Xenon-Stup&highlight=oem+xenon

Also check the links to M3F forums. read through the whole thread!

Good luck

EDIT: Hopefully the xenon lights you got already have the ballast and ignitor on them. If not.. well you are looking at another 200 for 2 ballast and ignitors. Plus xenon bulbs.

[Elite2k]

hey actually after reading i think my situation is quite easy my headlights have the balast and bulbs and ignitor cable inside all i have to do is install the headlamps inside the mazda 3 body and i have two plugs on for the auto leveler 3 pin cable and one 2 pin for the balast..
-i just need the power cable for the balast and a way to go manual i guess for the auto leveler