Starter Not getting enough Power from Ignition cylinder

[RetroLite]

Hey I'm havin a problem on my 07 2.0 the wire that goes to the starter which is the thin wire with the white connector that comes from the ignition cylinder from the engine. Anyone have a diagram from ignition cylinder to the starter of this wire? Also anyone know what could cause this wire to stop working if the 2 relays in the engine compartment are still good?

Thank you,
Dragos

[Booter22]

i think. cant remember if it does for that year but there might be an updated starter short cord wire.

[RetroLite]

Can you find that bullitin?

[Johns 08 3 GT]

i think. cant remember if it does for that year but there might be an updated starter short cord wire.

There is. The trigger wire for the starter is probably corroded. If you go to any competent Mazda parts department they will know what you need. The part number is eluding me right now.

[RetroLite]

Found it guys, thank you!

Also fixed the problem by sanding the terminal on the starter and reconnecting the plug a few times.