PDA

View Full Version : Crasth logs



crasth
08-10-2014, 08:35 PM
Hey guys so ive had some issues with power after my cs sri installation and havent been able to fix, i have a thread in msf forum so if u have time to go and give ur input that would.be awesome.
http://www.mazdaspeedforums.org/forum/showthread.php?t=174809

optiklenz13
08-11-2014, 03:59 PM
loki .. Move to http://www.torontomazda3.ca/forum/forumdisplay.php?239-MazdaSpeed3-Tuning
crasth which map are you running and list your mods..

crasth
08-11-2014, 04:20 PM
loki .. Move to http://www.torontomazda3.ca/forum/forumdisplay.php?239-MazdaSpeed3-Tuning
crasth which map are you running and list your mods..
Cs sri+tih, cs rmm, cs stage one 91 map sri +tih

SomeGuy
08-11-2014, 04:37 PM
I doubt anyone here has any additional insight to that of MSF...or at least, you should have started a real thread here.

fywdyl
08-12-2014, 02:51 PM
What happens if you flash the stock map? Do you still get low boost targets?

crasth
08-12-2014, 03:01 PM
What happens if you flash the stock map? Do you still get low boost targets?
Still the same. I dont know what is going on. Do u think a maf cal will fix that?

fywdyl
08-12-2014, 03:27 PM
Still the same. I dont know what is going on. Do u think a maf cal will fix that?

Did you do a leak test like they told you to on MSF?

If you haven't done it yet, try doing a MAF cal, if the MAF cal is unsuccessful (like you can't get within +/- 4 LTFT) then it could be hardware issue.

Did you break the nipple on the TIP when installing it? Are any of the hoses kinked or ripped?

Also post logs here too.

crasth
11-09-2014, 11:55 PM
hey guys so now that im able to attach logs i wanna continue this thread and try to get some help from you guys, people at msf have been helpfull but i kinda feel more comfortable posting here as this is the forum i read more. so ive had the boost issue for quite some time and havent figured out the roots of it. i thought it was a boost leak but i took it to jimmy and he said he checked it and there was none. he said compression test came out well too (170-175 avg) now the problem im facing is i dont hit boost targets, back when the weather was warmer i was only getting peak of high 14s in 3rd gear. now that weather is colder im hitting 15s. this is really confusing me as i dont know why this is happening. i know in colder temps is easier to make boost but iunno why i was boosting lower in around 15 degrees which is not too hot to affect boost. ill post some logs so if anyone want to check out and help itll be much appreciated. im running stage 1 cs sri+tih map( upped the wg by 5%)

datalog13 was taken at 5 degrees and it seems like im close to my boost targets.
datalog 11 was taken on slightly warmer weather and you can see the diff.

i took few logs just to make sure the issue is consistent. now that there is no leak i dont know where should i start looking at