Do RAV4 steel rims fit?

[///M]

I\'m interested in gettting RAV4 steelies for winter - they look a lot better than black steelies with hubcaps. :D They\'re 16\" and 5x114.3, but I\'m not sure of the offset. Would they fit?

[bluntman]

I believe our bolt pattern is 5x100...the maximum offset should 42mm.

[Dr Butcher]

http://www.mazda3forums.com/viewtopic.php?t=9014

I think this thread is pretty useful. No 15\" info though, snobs! :p

[majic]

Originally posted by bluntman


I believe our bolt pattern is 5x100...the maximum offset should 42mm.

actually the bolt pattern is 5x4.5inch or 5x114.3mm (equivalent)

EDIT: that bolt pattern is the same as the RAV4\'s so yes it will fit (as long as the RAV4 is a 1996 or older - dunno if they made them before that)

[///M]

The bolt pattern and size should be ok but I\'m not sure of the offset.

Btw I\'m referring to the steelies on the current RAV4. They\'re about $70 each. I\'ve noticed that a lot of people with IS300s use them in winter.

[majic]

oh.. ic..

this is all i could find:

http://www.sporttrucksspecialty.com/wheels/bp/boltpattern_006.htm

from there it looks like a \'high offset\' - \"Typically +45, 40, 35 offset\"

here we go.. this shoudl answer your q?

\"The RAV4 wheel bolt pattern is 5x114.3cm (5x4.5\") w/43mm offset.
Looking to purchase WHEEL LOCKS? RAV4 stud size is 12mm with a 1.5 pitch.
When installing the locks... torque is 75 ft. lbs. \"

http://rav4world.com/index/tirelist.html

and here one of the wheels sold has a 45mm offset.. http://www.hubcaphaven.com/rav4_wheels.htm

HTH

--majic

[ESpec]

Hay guys just got some new steelie in stock; and have a test on the mazda 3 yesterday; it fit and looks pretty good too~~ check it out~~
for the mazda 3 the bolt patten is 5X4.5; just for the one who intrest to know about it;
also we are going to offer that steelie on special later on as well; so keep checking on us!!
E-Spec

PS: Thank you for Newlook to let us testing on his car.