Light up Door Sills

[mEtH]

ok I know this conversation was started in the ETB Grounding thread so I figure I would start another one because I am sure this is going to be a common topic.

I finally found images of them installed on the Mazda3Forums so here ya go...

Red Sills on Titanium Grey (http://www.mazda3forums.com/viewtopic.php?t=12663)

[dredd2099]

bleah
thought u have one alrdy
:p

[Xenon]

sw0rdfish and I tried looking... we started pushing random areas on the door, fiddling with the switch and everything, we couldn\'t find it either (to know what I\'m talking about, read the thread in the link in Post #1).

That\'s why the instructions say to wire it to the dome light, but like I said in the ETB Thread, that would require stipping the roof... and that is something I\'m not prepared to do.

[mEtH]

Alright here it is...

FULL WALKTHROUGH (http://home.kimo.com.tw/mo_shop2/diy_09_3.htm)

[billyfo]

good, it is Chinese:D :D

[majic]

use this :D

http://babelfish.altavista.com/

and use traditional chinese to english.. it\'s still messed up but better than figuring out all the squiggles :p

[Xenon]

I still don\'t want to be taking off all that door strippiing myself...

looks like a pretty big task considering you have to do it to all four doors.

[MajesticBlueNTO]

all that trouble for lighted door sills?!

[Xenon]

Originally posted by MajesticBlueN


all that trouble for lighted door sills?!

exactly why I\'m not going to jump into this project.