12V fuse on 2011 Mazda 3

[topspin]

Hi.

I have a Mazda 3 2011 GS. I purchased LED DRL lights that fit in the tear drop opening beneath the fog lights. I now need to connect the positive lead of the LED lights to an accessory 12V fuse. However, I looked at the user guide and can't figure out which fuse I should tap. Any suggestions as to which fuse I should tap?

[morganc]

As in, switched 12V? If so, then things like the cig lighters are fair game.

[Hyperion]

Any fuse that turns on when you want the fog lights on.

[FULLSCALE]

I unplugged my factory DRLs and connected my LED ones to those connectors. It's been working great for the last 3+ years.

[Hyperion]

I unplugged my factory DRLs and connected my LED ones to those connectors. It's been working great for the last 3+ years.

Considering (unless you have oem bi-x) those see a flux in voltage between drl & high beam, I hope your led's can handle the sudden voltage change.

[FULLSCALE]

Considering (unless you have oem bi-x) those see a flux in voltage between drl & high beam, I hope your led's can handle the sudden voltage change.

Forgot all about that... I do have them so my set up would be different than the OP.