View Full Version : Which K&N Replacement filter for CS SRI?
KevinM3
11-20-2015, 04:26 PM
Hello,
I need to replace the filter on my Corksport SRI. I have a 2.5L Mazda3 Sport.
Does Canadian Tire carry them?
If so, what size/part number would I purchase?
Know of any local stores carry K&N?
Thanks
Canadianbacon
11-20-2015, 07:59 PM
Why would you replace it... Just wash it out let it dry, that's what i did.
SpeedyBread
11-20-2015, 09:21 PM
PartSource carries K&N. Usually regularly stocked item but call ahead to see if they have it in stock for your car. If not they can probably order it in for you.
KevinM3
11-20-2015, 11:52 PM
Why would you replace it... Just wash it out let it dry, that's what i did.
I had trouble reinserting the filter back in and it ripped a piece of the rubber that wraps around the tube to the filter. And I want to replace it anyways as I got the SRI used.
PartSource carries K&N. Usually regularly stocked item but call ahead to see if they have it in stock for your car. If not they can probably order it in for you.
What size would I need to provide?
Thanks
Canadianbacon
11-21-2015, 12:09 AM
The CorkSport 3" Outlet filter has a 4.75" filter media length, protrudes 6” from end of fitting to which it is attached and is 6" at its largest diameter. Further dimensional data available on request. From corksport website
Not sure if you did yet but call Nextmod they always have filters for SRI, just pick a color. And then tell what one you have to confirm
SpeedyBread
11-21-2015, 10:24 AM
I had trouble reinserting the filter back in and it ripped a piece of the rubber that wraps around the tube to the filter. And I want to replace it anyways as I got the SRI used.
What size would I need to provide?
Thanks
If you call up PartSource you just need to give them the year, make, and model of the car along with the engine size for them to check in the catalog. They can look up the one that fits with your car so you won't need to know exact measurements. Just tell them what car.
xxfinity
11-22-2015, 09:37 PM
If you call up PartSource you just need to give them the year, make, and model of the car along with the engine size for them to check in the catalog. They can look up the one that fits with your car so you won't need to know exact measurements. Just tell them what car.
Think that would only apply if it was a drop in filter into a factory air box [emoji14]
KevinM3
11-23-2015, 10:11 PM
Emailed Nextmod and they have one for $70 AEM. Thanks guys
Canadianbacon
11-23-2015, 10:18 PM
Emailed Nextmod and they have one for $70 AEM. Thanks guys
Np
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.