MikeTheCheek logs

[MikeTheCheek]

Had to replace the turbo due to a broken compressor wheel. Went with the Corksport turbo and now being tuned by Freektune. Car is a 2007 Mazdaspeed3, mod list is as follows

Mod List:
Cobb SF Intake
cpe TIP
cpe RMM
cpe HPFP
cpe FMIC
cpe catted DP
HKS 3" CBE
Corksport Turbo
Corksport Radiator Shrouds
Corksport EBCS
Corksport 3.5 Bar MAP sensor
Cobb AP V3
55000km on the dot at time of turbo install and tuning process beginning.

I'm not going to be posting the logs from the base map. I will begin with the 1st revision.

129841298512986 Datalog 4 was done on a slight turn in the road causing the lower numbers.

V Dyno graph

http://i.imgur.com/Wrylwat.jpg?3

[pwdunmore]

Looks like fun pulling all the to redline, the final revision will be a beast I am sure. Justin/Freektune have a lot of experience with the platform.

[SomeGuy]

Re-do your plot with Smoothing 3 and CF 1.01 as per standard. Also put your occupant weight in.

You're really only making ~300whp, not 330whp.

[MikeTheCheek]

Re-do your plot with Smoothing 3 and CF 1.01 as per standard. Also put your occupant weight in.

You're really only making ~300whp, not 330whp.

Yep already found that out on MSF. Will be re doing it when I get home

[MikeTheCheek]

Here is the more accurate graph using datalog3

http://i.imgur.com/tleTneJ.jpg?1

[MikeTheCheek]

Got the second revision in my email yesterday and had some time to do the data logs tonight. The power definitely hits you harder than before but still comes on nice and smooth.

http://i.imgur.com/VkTewKY.jpg?1

[MikeTheCheek]

Revision 3 came in so here are the logs. Not sure why log1 came out the way it did, I thought it was the best log when I did it but if someone with more knowledge than me can chime in go right ahead! I will say the car may have been a bit heavier than other days as the trunk was a bit more full if it makes any difference...

http://i.imgur.com/quqxlYq.jpg?1

[MikeTheCheek]

Lost access to v Dyno for computer reasons so I won't be able to post the final graphs. Tune was finished a couple weeks ago just haven't gotten around to updating the thread. According to Justin the power is about 330-340whp and 350wtq. If I choose to upgrade to a 3.5 or 4" intake he said I would likely only see gains of about 5-10whp. From some reading I've done recently it appears the CS turbo has issues with boost spikes when running a 3.5" intake or bigger. Corksport is working on a fix for this so we will see when ever that decides to be released.

Car feels great, pulls strong, boost goes right through the whole power band with no tapering off. In regular conditions it is peaking at 23psi.