View Full Version : 2014 Mazda 3 GS 2.0L Manual
anothermazda
11-26-2019, 12:58 PM
Hello,
My Mazda has been making a slight noise on the left side, from the front while going over bumps. I got it diagnosed on Sunday with a general mechanic (the only one who was open) in Montreal. He suggested to replace the struts. I have 140k km, mostly on the highways (90k in the last 2 years). I am having a hard time finding strut assemblies in Hamilton area. Any suggestions about the supplier or the issue.
Thanks
G ~ MINI
11-26-2019, 02:19 PM
maybe its wheel bearings
anothermazda
11-26-2019, 02:51 PM
Possibly but I have no extra noise on the highway.
anothermazda
11-26-2019, 05:00 PM
The mechanic put it up on the lift, it did not look like endlinks were bad.
It is bizarre that I cannot buy quick strut assembly in Canada. I tried NAPA, Mazda, Canadian Tire, bunch of online.....
Flagrum_3
11-26-2019, 06:22 PM
The mechanic put it up on the lift, it did not look like endlinks were bad.
It is bizarre that I cannot buy quick strut assembly in Canada. I tried NAPA, Mazda, Canadian Tire, bunch of online.....
They sell Monroe Quickstruts at Canadian Tire here in Toronto so they should there (?). Try their online store, they'll deliver to your nearest CT I believe.
_3
anothermazda
11-26-2019, 09:18 PM
For a 3rd Gen?
Thanks.
anothermazda
11-26-2019, 09:29 PM
I did call my local CT without luck.
Flagrum_3
11-27-2019, 04:57 PM
I did call my local CT without luck.
Did you try online?
3rd gen are 5 years old, they should carry them.
_3
Flagrum_3
11-27-2019, 05:18 PM
Did you try online?
3rd gen are 5 years old, they should carry them.
_3
Okay I take that back. I just checked online and also the Monroe site and they don't carry the Quickstruts yet for your model year yet.
Maybe you should just look at replacing the struts alone with a good aftermarket?
_3
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.