View Full Version : Ignition wires and plugs?
tommy36
06-18-2005, 03:48 PM
Just wondering if anyone has looked into aftermarket ignition wires and plugs?, and if they found any place that carries some decent ones. Better than stock anyways. Thanks
MajesticBlueNTO
06-18-2005, 05:31 PM
the \'ignition wires\' lead up to a coil pack. the wires send a signal from the ECU to the coil pack on when to fire. it\'s not like traditional systems that have a distributor and then wires leading to the plug. thus, there probably won\'t be aftermarket ignition wires (unless some company turns the coil pack system into one with plug wires like the kit for the RSX)
as for plugs...the plugs are NGK iridium; they\'re good from the factory. the only thing is that if you can get your hands on ITR5F-13, your car will gain a bit more power..only if your stock plugs are ITR6F-13. if i remember, you\'re from b-lo, and the American cars have ITR6F-13, while some of the early Canadian 3s had the hotter ITR5F-13 plugs (later Canuck models switched to the colder plug). www.sparkplugs.com for more info.
tommy36
06-19-2005, 12:14 PM
Thanks for the info maj, didn\'t know that much about the ignition system.....
Powered by vBulletin® Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.