Flip-key for mazda 3

Quote:

---

Originally Posted by MAZDA Kitten

how do I open up my flip key?

edit; nevermind :)

http://kamipiula.net/pictures/FK6_640.jpg

---

Is the battery accessible for replacement ? I noticed that the range of my flipkey has dropped significantly.
Thanks.

Quote:

---

Originally Posted by bigbot

Hi Everyone,

I used to have 2 remotes. Now only have 1. Thanks to my 2 year old Golden Retriever who thinks if it is in view he gets to eat it. Anyways, I saw this post and thought about getting the the flip key for me and my wife can have the other remote.

My 1 remote has the following:

Mazda
P/N:0000-8F-F06
FCC ID:GOH-PCCEN2
IC:3954A-TN400
P3465

4 Buttons (panic, lock, unlock, start)

My wife went to go to the store and she used her key and when she unlocked and opened the door, the car alarm went off, since she did not have the remote she had to run back into the house and grab my keys to turn the alarm off. Is this normal? I thought since she had a key that would unlock and start the car that everything would be ok, guess not.

What costs would I be looking at for the flip key? or if I just wanted to get another regular remote. I also should mention that the car has remote start as well, not to sure if this would be a problem with the flip key.

Thanks for the help.

---

You have the OEM remote starter. Do you have your original 3 button remote? They're suppose to keep them in your glovebox or give them to you. A flip-key won't solve your problem since the mazda remote starter has an extra panic feature.

The alarm will still go off. So you would need to get a replacement remote starter transmitter.

i have an 09 mazda 3 GS sedan and my key fob has the trunk release button that works, so if i get the flip key, will that trunk button still work?

Malam the battery can be replaced. I sell them for $5.41 plus tax. I can replace it for you on the spot.

Quote:

---

Originally Posted by seelsy

i have an 09 mazda 3 GS sedan and my key fob has the trunk release button that works, so if i get the flip key, will that trunk button still work?

---

Swing by the dealership with both remotes and we'll try it no charge to see if it works.:)

Quote:

---

Originally Posted by FLIPDADY

Malam the battery can be replaced. I sell them for $5.41 plus tax. I can replace it for you on the spot.

---

Thanks - will do. I just sent you a message on a different matter. Probably will see you for both later this week.

Swing by the dealership with both remotes and we'll try it no charge to see if it works.:)[/QUOTE]

what dealership are you affliliated with, im from midland/orillia/barrie area so id need to make a trip to see ya

Quote:

---

Originally Posted by FLIPDADY

You have the OEM remote starter. Do you have your original 3 button remote? They're suppose to keep them in your glovebox or give them to you. A flip-key won't solve your problem since the mazda remote starter has an extra panic feature.

The alarm will still go off. So you would need to get a replacement remote starter transmitter.

---

I am not the original owner of the vehicle. I only received 2 OEM remote starters. How much would it cost to get a new OEM remote?

Quote:

---

Originally Posted by seelsy

Swing by the dealership with both remotes and we'll try it no charge to see if it works.:)

---

what dealership are you affliliated with, im from midland/orillia/barrie area so id need to make a trip to see ya[/QUOTE]

He's Joe from Mazda of Toronto.

ok thanks, ill message flip when i can make it in and we can see if we can get the trunk popper to work aswell

Quote:

---

Originally Posted by seelsy

ok thanks, ill message flip when i can make it in and we can see if we can get the trunk popper to work aswell

---

Been there, done that. Only a couple options to use a trunk popper. The trunk release button on the remote will never work to pop the trunk though.

Quote:

---

Originally Posted by cwp_sedan

Been there, done that. Only a couple options to use a trunk popper. The trunk release button on the remote will never work to pop the trunk though.

---

do you mean on the switchblade key remote? because on the remote that came factory with my car has the working trunk popper button, so i just want to see if programming the new remote will give me everything my current one has.

Quote:

---

Originally Posted by seelsy

do you mean on the switchblade key remote? because on the remote that came factory with my car has the working trunk popper button, so i just want to see if programming the new remote will give me everything my current one has.

---

Sorry, jumped back in here late. I didn't see that you had a 2009. I thought you were referring to the flip key.

Quote:

---

Originally Posted by cwp_sedan

Sorry, jumped back in here late. I didn't see that you had a 2009. I thought you were referring to the flip key.

---

do you think the trunk popper on the flipkey wont work even though ive got it on my stock key fob working?

If it was working on the one you got, I don't see why not... just have to be programmed the same way. Although, I could see it being a problem since the transmitter isn't from the Mazda 3...

Hello from New Zealand!

I have a JDM SP23 Axela, which comes factory with the flip key. However i lost it a few weeks back whilst hooning on my motorbike. What are the chances the the US spec RX8, Mz6, Miata remote, would work with my Japanese mazda.

I think Audi have different remote frequencies depending on their country of origin.
Your thoughts please callers.

Kind regards, Simon

Quote:

---

Originally Posted by Sims

Hello from New Zealand!

I have a JDM SP23 Axela, which comes factory with the flip key. However i lost it a few weeks back whilst hooning on my motorbike. What are the chances the the US spec RX8, Mz6, Miata remote, would work with my Japanese mazda.

I think Audi have different remote frequencies depending on their country of origin.
Your thoughts please callers.

Kind regards, Simon

---

You would have to check the part numbers. Can you post up a pic of the remote?

Quote:

---

Originally Posted by Sims

Hello from New Zealand!

I have a JDM SP23 Axela, which comes factory with the flip key. However i lost it a few weeks back whilst hooning on my motorbike. What are the chances the the US spec RX8, Mz6, Miata remote, would work with my Japanese mazda.

I think Audi have different remote frequencies depending on their country of origin.
Your thoughts please callers.

Kind regards, Simon

---

what year is your axela? do you have the VIN? I can try to cross match it with a north american one

I have an '06 Mazda3 and I've been trying to figure out how what flipkey's will work with my car. I called my dealership just to find out how much it would be just to get a flip key cut and was told I couldn't get one for my car.

Is this because the newer flip keys won't work in a '06?

Does it matter what year the flip key's are from? of course I'd like to get the latest one if possible

you can't just call any dealer up and ask them for one blindly... almost all of them don't know you can parts bin one off another car to make it work!

READ this thread, it'll answer all of your questions

Quote:

---

Originally Posted by iconicrocket

Has anyone seen the 2010 Mazda3 key fob conbination?

Does it flip out and can we CUT and PROGRAM it for 2004-2009 Mazda3 models?

---

I was looking to find out if anything came from this?

FlipDady posted pics of the '10 Mazda3 Key but not the Flip Key here.... No one confirmed if the '10 Flip would work with any 04-09 model (unless I missed it somewhere, which is quite possible).

And here, in the very first post it lists that the transmitter for the Mazda 5 works but I thought read it somewhere in here (can't find it right now) that a Mazda5 Key/Transmitter wouldn't work.

From what I gather from here, please correct me if I'm wrong, the transmitters from Mazda6 sedan, RX-8, Miata or Mazda5 will work and since all the flip keys are the same any uncut for these will work, is that right?

Could anyone with a 06 Mazda please confirm if the FCC ID SKE125-01 will work?
I found this on ebay.

Hi there,

I have very similar questions to many members here...

I am currently looking for a spare set of flipkey + remote for my 2009 Mazda 6 (Canada). I've tried a couple of ebay sellers without any luck because we are in Canada. Here is what I've found out from the local Mazda dealership:

KEY G2YA-76-2GXB $68.36
REMOTE GS4B-67-5RYA $154.58 (dealer claimed this is different from 2008)

Of course, I am not going to buy them at that price from the dealership. But I could not find a reliable source/shop to get the remote part of the set. The remote part # is different from "GP9C675RYB" and I am wondering if it's a different remote for sure for the 2009 Mazda 6 (Canada)?

Further more, when I opened the key, I've found the following:
5WK43451D
HP315MHZ
032908

No FCC# or ID#.....

Any suggestion or advice?
Regards,
Andy

Information on 2nd remote:
Siemens VDO
5WK43451E
HP315MHZ
092808

would this key/remote work on an 07 mazda 3



or does it only work with the key/remote with the 4 buttons

Quote:

---

Originally Posted by yeknom

would this key/remote work on an 07 mazda 3



or does it only work with the key/remote with the 4 buttons

---

http://cgi.ebay.com/ebaymotors/2005-...ht_1258wt_1167

Quote:

---

Originally Posted by yeknom

http://cgi.ebay.com/ebaymotors/2005-...ht_1258wt_1167

---

IMO, better to contact Joe (FLIPDADY) and get one from him. TM3 discount and him knowing what will work is better than buying something from ebay when you aren't sure.