Independent Fog Mod with OEM HIDs??

[JaYson]

okay i worked it out in my head.

materials:
H7(spades) to 9006 wire (like those extras attached to H7 HID bulbs)
H11(female) connectors
H11(prongs) to 9006 wire (like those extras attached to H11 HID bulbs)

note: take the H7(spades) to 9006 wires, clip off the 9006 and attach the H11 Female connector -- now i have a H7 (spades) to H11 Female connector wire


Theory:
id have the H7 spades to go into the stock low beam H7 plug. then i change the 9006 plug to a H11 Female connector. - this makes the stock low beam plug straight into the Fog bulb.

then for the Low beams (HIDs):

get the wires from a H11 HID kit which will plug into the Stock Fog H11 plug (Prongs), then go into the harness for the HIDs (low beam)



THEREFORE: the Fogs will be controlled like DRLs and be on at all times. and the low beams (HIDs) will be controlled by the stock Fog Light switch

does that make sense? will that work?


H11 Female connector : http://cgi.ebay.ca/2x-H8-H10-H11-880...item2a11414c50