Audio Mods.. Anybody Want To Give me a Hand? I'm buying...

[wip]

Spend the money on the yellow top! i had one in the car but took it out to put in my infinity all the interior lights will dim if the sub hits hard enough atleast it did when i had the subs and im not sure if im understanding everything here properly but u know there is a wire kit running from the deck to the trunk right just making sure u knew that that way your not spending more money. i did that and then used a distributor block to go from one amp to the other

[mrjun18]

he isn't planning on getting a Sony amp

The older Sony amps were tough. its the Xplod series' that sucks

yep

[ds08tf]

Lol okay.. I'm keeping the xplod speakers cause I already have them sooo.. that's not really an option. I may upgrade later maybe not.
To wip, I know I never got a deck wiring kit because I saw that. What gauge did you use out of curiousity as the distro block I'm getting is 4 gauge.

[wip]

I have no idea! i paid to get everything installed i didnt really do anything my self

[CH0SiiN1]

Lol okay.. I'm keeping the xplod speakers cause I already have them sooo.. that's not really an option. I may upgrade later maybe not.
To wip, I know I never got a deck wiring kit because I saw that. What gauge did you use out of curiousity as the distro block I'm getting is 4 gauge.

Just check.. if you can't tell by looking then go to any store that sells wiring kits and look at the thickness of wire/gauge
0gauge is as thick as the width of a penny
4gauge us as thick as sharpie thin marker
Sorry for lame references lol

[Default User]

I'm pretty sure that the Eonon decks are plug and play (somebody correct me if I'm wrong) You won't need a HU wiring kit

[Genpu_Mz3]

I'm pretty sure that the Eonon decks are plug and play (somebody correct me if I'm wrong) You won't need a HU wiring kit

Yes they are plug and play, the come with everything needed, no need to buy a wiring kit.

[ds08tf]

Sounds good! I'm picking up the deck and a pair of camber arms in the states this Saturday. Also is 175 for a 1500 watt phoenix gold octane a good deal? Would that be a good amp to supplement the other amp I already have? And what should I do with WIP's wiring if I don't need it? Just leave it there?

thanks!

[Genpu_Mz3]

Sounds good! I'm picking up the deck and a pair of camber arms in the states this Saturday. Also is 175 for a 1500 watt phoenix gold octane a good deal? Would that be a good amp to supplement the other amp I already have? And what should I do with WIP's wiring if I don't need it? Just leave it there?

thanks!

that amp is more then enough power for your subwoofer. and yes $175 is a solid price. i dont know what he gave you. as long as you have 17-20ft of power wire 4ft of ground wire 75ft - 100ft of speaker wire (only if your amplifying your door speakers), a fuse, fuse holder, and 3 sets of rca's (only 1 if your only powering your sub with an amp) and 17-20ft of trigger wire, thats all your going to need.

[ds08tf]

Thanks for all the info maztre. I'll check how much wire I have and pick some up if I'm missing some. How much speaker wire do I need if I'm doing the sub with an amp as well as the speakers.

[Genpu_Mz3]

Thanks for all the info maztre. I'll check how much wire I have and pick some up if I'm missing some. How much speaker wire do I need if I'm doing the sub with an amp as well as the speakers.

75 - 100 ft of 16gauge to be safe

[ds08tf]

Ok I'll pick it up! Thanks!

[ds08tf]

Got the Phoenix Gold Octane amp and have plans to meet up with another member next Sunday to install all this good stuff! I'll post updates when it's finished! Thanks again all!