Results 1 to 10 of 10

Thread: 60DR Cp-e RMM or 70DR JBR RMM

  1. #1
    Jr Member ds08tf's Avatar
    Join Date
    Sep 2012
    Location
    St.Catharines
    Ride
    Flying Spaghetti Monster
    Posts
    416
    Thanks
    2
    Thanked 3 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Question 60DR Cp-e RMM or 70DR JBR RMM

    I'm trying to decide between these two RMMs. I can get the JBR for 80 dollars and the Cp-e for 150. I'm worried about the vibes being worse in the 70 than the 60. I know that they will be somewhat but as long as it settles down I don't really care. What does everyone think?
    Keep in mind I NEVER track my car. This is purely so that I enjoy driving the car more.
    Will 70 be too much for DD or will I settle into it? Also is there a big difference between 60 DR and 70 DR?
    I have looked around but not tooooo much info comparing the two.
    From what I've heard it's vibes no matter what. I'm just torn between cheaper and possibly too many vibes and more expensive but less vibes.

    I'm probably going to go for the 70 DR and if it's too much after 2 or 3 thousand kms I'll swap it for a 60 DR and sell the 70.
    Just looking for feedback.
    Cheers

  2. #2
    Moderator loki's Avatar
    Join Date
    Mar 2011
    Location
    Toronto
    Age
    43
    Posts
    18,049
    Thanks
    1,911
    Thanked 6,154 Times in 3,173 Posts
    Mentioned
    881 Post(s)
    Tagged
    1 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM


  3. #3
    Sr Member Thrizzl3's Avatar
    Join Date
    Jul 2008
    Age
    37
    Ride
    '18 Subaru WRX / '20 CX9
    Posts
    18,375
    Thanks
    430
    Thanked 500 Times in 260 Posts
    Mentioned
    265 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    i had a 60A CP-e RMM didn't find stiff enough so i went with the 75A.

    Just don't go 80...your rear view mirror will be useless!

  4. #4
    Sr Member boyracer's Avatar
    Join Date
    May 2008
    Location
    NATOR T.O. Outpost
    Ride
    Vapour Trail
    Posts
    4,588
    Thanks
    621
    Thanked 358 Times in 201 Posts
    Mentioned
    117 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    epic thread

  5. #5
    Jr Member ds08tf's Avatar
    Join Date
    Sep 2012
    Location
    St.Catharines
    Ride
    Flying Spaghetti Monster
    Posts
    416
    Thanks
    2
    Thanked 3 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    Quote Originally Posted by Thrizzl3 View Post
    i had a 60A CP-e RMM didn't find stiff enough so i went with the 75A.

    Just don't go 80...your rear view mirror will be useless!
    Hahaha so 70 it is.

  6. #6
    Jr Member ds08tf's Avatar
    Join Date
    Sep 2012
    Location
    St.Catharines
    Ride
    Flying Spaghetti Monster
    Posts
    416
    Thanks
    2
    Thanked 3 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    In my research I did come across this. Duly noted.

  7. #7
    Jr Member Stretch's Avatar
    Join Date
    Jul 2008
    Location
    Ajax
    Posts
    492
    Thanks
    150
    Thanked 22 Times in 14 Posts
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    I have cp-e stage2 which is 65duro and I wish it was stiffer. Vibes were large at first, but softenned quickly to a mildness which leaves me yearning for more.
    Go for the 70.
    eric
    Check Out My Workout Supplement Blog!
    Engine: JBR 88 Duro RMM . Suspension: Bilstein B8, Cobb Springs

  8. #8
    Jr Member ds08tf's Avatar
    Join Date
    Sep 2012
    Location
    St.Catharines
    Ride
    Flying Spaghetti Monster
    Posts
    416
    Thanks
    2
    Thanked 3 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    Quote Originally Posted by Stretch View Post
    I have cp-e stage2 which is 65duro and I wish it was stiffer. Vibes were large at first, but softenned quickly to a mildness which leaves me yearning for more.
    Go for the 70.
    eric

  9. #9
    Member sarujo's Avatar
    Join Date
    Jun 2010
    Location
    GTA
    Posts
    1,295
    Thanks
    74
    Thanked 79 Times in 60 Posts
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    After having to get the bushing replaced after 2 months of use on my 60duro CPe stage 1, I'm not really impressed with cpe anymore. I requested them to replace with the EPDM 75A bushing, but if I had to do it all over all I would go JBR.


    2010 Sport 2.0L 5MT

  10. #10
    Jr Member ds08tf's Avatar
    Join Date
    Sep 2012
    Location
    St.Catharines
    Ride
    Flying Spaghetti Monster
    Posts
    416
    Thanks
    2
    Thanked 3 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 60DR Cp-e RMM or 70DR JBR RMM

    Got a 70 Duro JBR for 90 including shipping and taxes. Not too shabby.

Similar Threads

  1. JBR RMM and PMM Vibrations
    By DarkKilla in forum Engine & Drivetrain
    Replies: 19
    Last Post: 07-12-2012, 02:24 PM
  2. RMM Issue
    By Hyperion in forum Performance
    Replies: 15
    Last Post: 04-14-2012, 03:03 AM
  3. any RMM install?
    By pkaczmar in forum How-To Guides & Reference
    Replies: 4
    Last Post: 05-24-2011, 11:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •