New Accessport User, Suggested Maps or Tips?

[mikey32235]

mentioned this to him before, i believe he is purchasing one.

[JSharrmz]

You mean flat foot shifting? lol... FFS(Flat foot shifting) + LC (Launch control) = Bye Bye Stock clutch

Yeah same thing, not gonna use toooo much if at all, just fun to have

[JSharrmz]

mentioned this to him before, i believe he is purchasing one.

I'm gonna get seven to order it, hopefully it'll be installed within two weeks, or is that too long on a map..?

[Prezi]

I ran stage 1 93 (SRI+TIH) for about a month before installing my internals. You'll be fine.

[loki]

I'm gonna get seven to order it, hopefully it'll be installed within two weeks, or is that too long on a map..?

what map?

what mods?

[JSharrmz]

I ran stage 1 93 (SRI+TIH) for about a month before installing my internals. You'll be fine.

Thanks for the reassurance man, and @loki Cobb SRI Cobb TIH CNT CBE (Stage 1 - SRI + TIH - 91)

[loki]

Thanks for the reassurance man, and @loki Cobb SRI Cobb TIH CNT CBE (Stage 1 - SRI + TIH - 91)

that's very light mods

[JSharrmz]

Therefore..... I'll be fine?

[shift8]

This... I did internals basically right after an intake.

The best supporting mod for our cars. I'd call it a prerequisite for an AP

I did this recently as well. RMM, AP, SRI+TIH, then internals. Ran safe mode until internals were installed.

[JSharrmz]

Think safe mode is necessary? I will have internals within the month..

[JSharrmz]

Is economy mode "safe" might as we'll save on gas as we'll as play it safe

[Thrizzl3]

just run a regular stage 1 map. intake + inlet. and enjoy it. install internals when you upgrade the tmic. i ran the same mods as you without upgrading the internals. just monitor fuel pressure at WOT....if it's under 1600psi then start ordering those autotechs.