Code Scan request - Downtown Toronto

[AlexS187]

Good day everyone!

Location: Sherbourne & Bloor, but don't get up, I'll come over to wherever is convenient for you.
Request: Scan code and reset.

I am new here and joined up because my engine light came on
I checked the fuel cap

I saw another post with the exact same symptoms:
1. Rainy day
2. engine, traction and AT lights came on at the same time (makes me think electrical)
3. Traction & AT lights off after about half a minute.
4. Engine light stays on n(Probably just needs a "reset")

So I'm guessing it's just something that got wet. Would be great if I could check the code and be safe.

Thank you and happy holidays!
Alex

P.S. I popped into Canadian Tire on Yonge and the cheapest scanner was $100+ :O sheesh >:/

[FD22]

I believe Part Source can check your code for you for free.

[Jackal]

You should pick one up online. I got this one from Amazon.ca. Scans and turns off CELs. Also comes with a manual and list of codes.

http://www.amazon.ca/gp/aw/d/B001LHV...KM257VCX5YEWB0

[Kiewan]

You should pick one up online. I got this one from Amazon.ca. Scans and turns off CELs. Also comes with a manual and list of codes.

http://www.amazon.ca/gp/aw/d/B001LHV...KM257VCX5YEWB0

Princess autos cheapest one is 70 on sale.... This looks good. So far so good?

OP: phone up a part source if you haven't had the code cleared yet. See if they will do it.

[Jackal]

Princess autos cheapest one is 70 on sale.... This looks good. So far so good?

It's a good one. Easy to use. Used it a couple of times on the Mitsubishi and it worked great. Scan told me it had a misfire. I cleared it, changed out the plugs and no problems.

[AlexS187]

It's a good one. Easy to use. Used it a couple of times on the Mitsubishi and it worked great. Scan told me it had a misfire. I cleared it, changed out the plugs and no problems.

Ordered me one of these now.
Thank you very much.