Any online sellers that are selling the flip remote that works with 07 mazda 3? I am looking for one with the remote and the chip built in so I just need to cut it and program it once I get it. I am looking to spend ~$40 on it.
Thanks
Any online sellers that are selling the flip remote that works with 07 mazda 3? I am looking for one with the remote and the chip built in so I just need to cut it and program it once I get it. I am looking to spend ~$40 on it.
Thanks
Get one from eBay. Here's one: http://cgi.ebay.ca/05-06-2005-2006-M...ts_Accessories
I have an 06 Mazda 3 Hatch and my FC ID is KPU41846.
Has anyone had any luck finding a flip key that works with this ID? I searched eBay and just the regular fobs came up. I tried KPU41788 (for the 07s I believe) and tons of flip keys came up.
FOR SALE:
2006 Mazda 3 GT Sport
+
19" BBS R3 FORGED OEM RIMS & more!
- Koni Yellows - Eibach Prokits - MS3 RSB - CP-E RMM - Magnaflow CBE - PRM SRI - TWM Short Shifter - GV Front Lip - AE Grill - MS3 Spoiler & Add-on Lip -
My 07 has KPU41846 too
Is there a 4 button flip key remote that works with a Canadian 2009 Mz3?
If anyone got one to work, I'd like to know the FCC#!
Also, has anyone been able to verify that the trunk popper actually works on the 2009 3?
I'm thinking of getting this one http://cgi.ebay.ca/MAZDA-CX-7-6-3-5-...item4152558375 I haven't confirmed the FCC ID on my fob, but it being a 08, and from some eailer posts, the ID should match. Here is a question tho that I'm not to sure if it has already been answered.
I have two keys right now, and 1 fob. If i buy two of these flip keys, will that work or will I have to lose one of my current keys. Basically, ideally I'd like to have my wife and I with flips, and then the spare with the fob, and just not use the other spare key by it's self. Has anyone done this, is it possible? thanks in advance and sorry of this has already been answered already.
J
***2008 GT Hatch CWP***
MS3 Gen1 Rims black, Eye lids, 20% tint, stubby antenna
The safest way is to get the remote part from MoT (better yet, get the whole thing). The key part you can get from ebay as its the same for all years (it should be way cheaper than getting it from the dealer and you can get it cut pretty much anywhere (few exceptions ofcourse).
What is MOT charging? What does it include??
Just send FLIPDADDY a PM for the latest pricing. There are two parts - the key and the remote (each is sold seperately i believe)
Last edited by dhlwtu; 10-14-2010 at 02:23 PM.
I think the OEM mazda flip is cheaper than $115. I think I got mine for like $80. Programmed it myself as well.
If anyone goes and follows the steps that Ryan (cwp_sedan) posted on that picture, make sure that when you're done locking and unlocking the doors with the power locks and you put your key into the ignition, make sure to turn it to ON and OFF THREE times within 10 seconds before attempting to open and close the drivers door. This wasn't in the steps and I was just outside for 20 minutes longer than I should've been trying to figure out where I went wrong.
Just a heads up. My flipkey is programmed now and ready to go.
--- CURRENT - 2012 BMW 328i 6MT :: White on Red ---
--- OLD - 2006 Mazda3 GT GFX 5MT :: Black on Black ---
Got my flip key from Joe at MoT yesterday ... everything works great. Had Joe prepare all the paper work so I could run in during my lunch time, get it done and run out! Everything went smooth until the key cutter motor died hahaha ... but he got it done manually! I programmed the key myself painlessly. Thanks Joe!![]()
Does anyone know where i can find this flip key ? http://i76.photobucket.com/albums/j1..._keyfob_01.jpg
mods - 35% window tint, removed door moldings, shark fin, nite-shade side markers, redline led tails, blacked emblems, and Evil M
mods to come - Konig Zero rims, new shift knob and e-brake handle, magnaflow exhaust,..
Looks like this and the person wrapped it in CF.
http://cgi.ebay.ca/FLIP-SWITCHBLADE-...ht_2269wt_1139
I'm in Windsor, about 4 hours away. Is there a way to get this shipped?
1) I bought my Mz3 used, would I have to update Mazda with my owners info so that you can access my VIN and customer info to cut it?
2) IF I was to go the route of getting on of the OEM ones off Ebay, and even tho they say it will work for my Mazda 3 GT 2006, the FCD ID don't match up (Mine is KPU41846), is there a difference than that one shown here BRAND NEW MAZDA KEYLESS ENTRY REMOTE KEY FOB UNCUT!!!. I know that will be $50 shipped to me, then I would have to pay for cutting and then reprogram myself, but it would save a trip to Toronto.
3) If you do ship, can you program it as well? My friend lost her second key while in Detroit and is not having issue with Windsor Mazda to get a replacement key... they want to charg her something ridiculous like $300!!!
4) What is the MAIN difference between the Canadian FCC# for the FOB and the American FCC#?
Thanks for any help everyone!
mach.x
2006 Mazda GT
Kovan KT-6110 - GPS/DVD