Rear speaker wire color

[machda]

Hey guys i just bought 2 12inch JL audio subs boxed already, with Zapco AG350 4 channel amp. the wiring is already done in my car since i bought it used.There is a red 10 gauge amp wire going from my battery to my trunk its missing the fuse any one know what size the fuse is? the way i am trying to wire this is to the stock deck. As it was previously installed by someone else there is RCA cables behind the deck. how i would i go about installing those ? to rear speakers?
i have posted pics of the speakers and amp





thanks

[Default User]

it seems like the previous owner has already tapped the signal and the LOC is hidden behind the dash.

If this is so - connect the RCA, and power cables to the amp. Ground the amp to the chassis. Put in a new fuse, and bridge the amp to the subs

[Default User]

what year is your car?

on my 05 (IIRC) Rear Passenger side is White (+) and Gray (-) and Rear Drivers side is Violet/White (+) and Grey/White (-)

[machda]

what year is your car?

on my 05 (IIRC) Rear Passenger side is White (+) and Gray (-) and Rear Drivers side is Violet/White (+) and Grey/White (-)

its a 2006 mazda 3 sand mica i or s model not to sure lower end
so what do i do with the RCA cables behind the deck ?